• 200G QSFP56 DAC

ST-DAC-QSFP56-2*QSFP56-2

ST-DAC-QSFP56-2*QSFP56-2
Email: sales@sateoptics.com

3-year warranty · Standard lead time 3–7 days

QSFP56 to 2× QSFP56 Breakout DAC — 2m, Built for Rack-to-Rack Links

The Sate Optics ST-DAC-QSFP56-2*QSFP56-2 is a 200G to 2× 100G breakout direct attach copper cable, factory-terminated with QSFP56 to 2× QSFP56 connectors and cut to 2m(7ft) — sized for links between neighbouring racks.

Why This Module

  • One port, 2 links: a single 200G switch port fans out to 2× 100G — dense breakout wiring without separate transceivers
  • 2m rack-to-rack reach: crosses to the neighbouring cabinet with room for overhead or underfloor routing
  • Factory-terminated and plug-and-play: both ends arrive as one tested assembly — plug in, link up, with lower latency than an optical hop
  • Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.

Key Specifications

ParameterSpecification
Connector EndsQSFP56 to 2× QSFP56
Data Rate200Gbps to 2× 100Gbps
Cable TypePassive twinax copper breakout cable
Wire Gauge26AWG
Cable Length2m(7ft)
Signal ConditioningNone (passive)
Operating Temperature0~70℃

Used In

  • One 200G port split into 2× 100G links
  • QSFP56 spine-to-leaf fan-out wiring
  • Rack-to-rack links between neighbouring cabinets
  • Typical platforms: Cisco Nexus 9300 series, Arista 7280R3 series, NVIDIA Spectrum-2 SN3000 series, Huawei CloudEngine 6866, H3C S12500 / S9820 series.

Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.

Where It Fits

  • Rack-to-rack uplinks between neighbouring cabinets in the same row
  • Middle-of-row aggregation over short copper runs
  • Replacing transceiver pairs where the run is short enough for copper — lower cost, lower power, nothing to clean or pair

Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.

More in 200G QSFP56 To 2x100G QSFP56 Breakout DAC

Part Number Description Picture Data Rate(Mbps) AWG Media Type Length Temp.(℃) Note Datasheet
ST-DAC-QSFP56-2*QSFP56-0.5 200G QSFP56 to 2x100G QSFP56 Passive DAC, 30AWG, 0.5m ST-DAC-QSFP56-2*QSFP56-0.5 200Gbps/2x100Gbps 30AWG Passive Direct Attach Copper Breakout Cable 0.5m(2ft) 0~70℃ MCP7H50-V00AR30 Compatible; QSFP56 to 2x100G QSFP56; ≤0.5W
ST-DAC-QSFP56-2*QSFP56-1 200G QSFP56 to 2x100G QSFP56 Passive DAC, 30AWG, 1m ST-DAC-QSFP56-2*QSFP56-1 200Gbps/2x100Gbps 30AWG Passive Direct Attach Copper Breakout Cable 1m(3ft) 0~70℃ MCP7H50-V001R30 Compatible; QSFP56 to 2x100G QSFP56; ≤0.5W
ST-DAC-QSFP56-2*QSFP56-1.5 200G QSFP56 to 2x100G QSFP56 Passive DAC, 30AWG, 1.5m ST-DAC-QSFP56-2*QSFP56-1.5 200Gbps/2x100Gbps 30AWG Passive Direct Attach Copper Breakout Cable 1.5m(5ft) 0~70℃ MCP7H50-V01AR30 Compatible; QSFP56 to 2x100G QSFP56; ≤0.5W
ST-DAC-QSFP56-2*QSFP56-2 200G QSFP56 to 2x100G QSFP56 Passive DAC, 26AWG, 2m ST-DAC-QSFP56-2*QSFP56-2 200Gbps/2x100Gbps 26AWG Passive Direct Attach Copper Breakout Cable 2m(7ft) 0~70℃ MCP7H50-V002R26 Compatible; QSFP56 to 2x100G QSFP56; ≤0.5W
ST-DAC-QSFP56-2*QSFP56-2.5 200G QSFP56 to 2x100G QSFP56 Passive DAC, 26AWG, 2.5m ST-DAC-QSFP56-2*QSFP56-2.5 200Gbps/2x100Gbps 26AWG Passive Direct Attach Copper Breakout Cable 2.5m(8ft) 0~70℃ MCP7H50-V02AR26 Compatible; QSFP56 to 2x100G QSFP56; ≤0.5W
ST-DAC-QSFP56-2*QSFP56-3 200G QSFP56 to 2x100G QSFP56 Passive DAC, 26AWG, 3m ST-DAC-QSFP56-2*QSFP56-3 200Gbps/2x100Gbps 26AWG Passive Direct Attach Copper Breakout Cable 3m(10ft) 0~70℃ MCP7H50-V003R26 Compatible; QSFP56 to 2x100G QSFP56; ≤0.5W