400G OSFP DAC
The cables in this range come in lengths from 0.5m to 3m, in passive copper builds. A DAC is the simplest short link there is: two transceiver ends on one twinax copper cable, no optics and almost no power draw. Wire gauges and lengths for every model are in the table below.
All models in this range are passive: no power draw and nothing to configure, for in-rack and rack-to-rack runs. Thinner gauges (higher AWG numbers) flex more easily in crowded racks, while thicker gauges carry the longest reaches.
Every cable in this range is coded for major networking platforms and 100% tested before shipment, and is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.
400G OSFP to OSFP DAC
| Part Number | Model No. | Picture | Data Rate(Mbps) | Wavelength | Media Type | Reach | TX Power(dBm) | RX Sens.(dBm) | Temp.(℃) | Note | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ST-DAC-400G-OSFP-0.5 | DAC-400G-OSFP-0.5 |  |
400G/400G | 30AWG | Passive Direct Attach Copper Twinax Cable | 0.5m (2ft) | <0.1W | / | 0°C~70°C | ||
| ST-DAC-400G-OSFP-1 | DAC-400G-OSFP-1 | |
400G/400G | 30AWG | Passive Direct Attach Copper Twinax Cable | 1m (3ft) | <0.1W | / | 0°C~70°C | ||
| ST-DAC-400G-OSFP-1.5 | DAC-400G-OSFP-1.5 | |
400G/400G | 30AWG | Passive Direct Attach Copper Twinax Cable | 1.5m (5ft) | <0.1W | / | 0°C~70°C | ||
| ST-DAC-400G-OSFP-2 | DAC-400G-OSFP-2 | |
400G/400G | 28AWG | Passive Direct Attach Copper Twinax Cable | 2m (7ft) | <0.1W | / | 0°C~70°C | ||
| ST-DAC-400G-OSFP-2.5 | DAC-400G-OSFP-2.5 | |
400G/400G | 28AWG | Passive Direct Attach Copper Twinax Cable | 2.5m (8ft) | <0.1W | / | 0°C~70°C | ||
| ST-DAC-400G-OSFP-3 | DAC-400G-OSFP-3 | |
400G/400G | 28AWG | Passive Direct Attach Copper Twinax Cable | 3m (10ft) | <0.1W | / | 0°C~70°C |
