ST-DAC-QSFP56-2*QSFP56-2.5
3-year warranty · Standard lead time 3–7 days
QSFP56 to 2× QSFP56 Breakout DAC — 2.5m, Built for Rack-to-Rack Links
The Sate Optics ST-DAC-QSFP56-2*QSFP56-2.5 is a 200G to 2× 100G breakout direct attach copper cable, factory-terminated with QSFP56 to 2× QSFP56 connectors and cut to 2.5m(8ft) — sized for links between neighbouring racks.
Why This Module
- One port, 2 links: a single 200G switch port fans out to 2× 100G — dense breakout wiring without separate transceivers
- 2.5m rack-to-rack reach: crosses to the neighbouring cabinet with room for overhead or underfloor routing
- Factory-terminated and plug-and-play: both ends arrive as one tested assembly — plug in, link up, with lower latency than an optical hop
Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.
Key Specifications
| Parameter | Specification |
| Connector Ends | QSFP56 to 2× QSFP56 |
| Data Rate | 200Gbps to 2× 100Gbps |
| Cable Type | Passive twinax copper breakout cable |
| Wire Gauge | 26AWG |
| Cable Length | 2.5m(8ft) |
| Signal Conditioning | None (passive) |
| Operating Temperature | 0~70℃ |
Used In
- One 200G port split into 2× 100G links
- QSFP56 spine-to-leaf fan-out wiring
- Rack-to-rack links between neighbouring cabinets
- Typical platforms: Cisco Nexus 9300 series, Arista 7280R3 series, NVIDIA Spectrum-2 SN3000 series, Huawei CloudEngine 6866, H3C S12500 / S9820 series.
Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.
Where It Fits
- Rack-to-rack uplinks between neighbouring cabinets in the same row
- Middle-of-row aggregation over short copper runs
- Replacing transceiver pairs where the run is short enough for copper — lower cost, lower power, nothing to clean or pair
Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.
More in 200G QSFP56 To 2x100G QSFP56 Breakout DAC
| Part Number | Description | Picture | Data Rate(Mbps) | AWG | Media Type | Length | Temp.(℃) | Note | Datasheet |
|---|---|---|---|---|---|---|---|---|---|
| ST-DAC-QSFP56-2*QSFP56-0.5 | 200G QSFP56 to 2x100G QSFP56 Passive DAC, 30AWG, 0.5m | ![]() |
200Gbps/2x100Gbps | 30AWG | Passive Direct Attach Copper Breakout Cable | 0.5m(2ft) | 0~70℃ | MCP7H50-V00AR30 Compatible; QSFP56 to 2x100G QSFP56; ≤0.5W | |
| ST-DAC-QSFP56-2*QSFP56-1 | 200G QSFP56 to 2x100G QSFP56 Passive DAC, 30AWG, 1m | ![]() |
200Gbps/2x100Gbps | 30AWG | Passive Direct Attach Copper Breakout Cable | 1m(3ft) | 0~70℃ | MCP7H50-V001R30 Compatible; QSFP56 to 2x100G QSFP56; ≤0.5W | |
| ST-DAC-QSFP56-2*QSFP56-1.5 | 200G QSFP56 to 2x100G QSFP56 Passive DAC, 30AWG, 1.5m | ![]() |
200Gbps/2x100Gbps | 30AWG | Passive Direct Attach Copper Breakout Cable | 1.5m(5ft) | 0~70℃ | MCP7H50-V01AR30 Compatible; QSFP56 to 2x100G QSFP56; ≤0.5W | |
| ST-DAC-QSFP56-2*QSFP56-2 | 200G QSFP56 to 2x100G QSFP56 Passive DAC, 26AWG, 2m | ![]() |
200Gbps/2x100Gbps | 26AWG | Passive Direct Attach Copper Breakout Cable | 2m(7ft) | 0~70℃ | MCP7H50-V002R26 Compatible; QSFP56 to 2x100G QSFP56; ≤0.5W | |
| ST-DAC-QSFP56-2*QSFP56-2.5 | 200G QSFP56 to 2x100G QSFP56 Passive DAC, 26AWG, 2.5m | ![]() |
200Gbps/2x100Gbps | 26AWG | Passive Direct Attach Copper Breakout Cable | 2.5m(8ft) | 0~70℃ | MCP7H50-V02AR26 Compatible; QSFP56 to 2x100G QSFP56; ≤0.5W | |
| ST-DAC-QSFP56-2*QSFP56-3 | 200G QSFP56 to 2x100G QSFP56 Passive DAC, 26AWG, 3m | ![]() |
200Gbps/2x100Gbps | 26AWG | Passive Direct Attach Copper Breakout Cable | 3m(10ft) | 0~70℃ | MCP7H50-V003R26 Compatible; QSFP56 to 2x100G QSFP56; ≤0.5W |


