• 40G QSFP+ DAC

ST-DAC-QSFP-4*SFP-4

ST-DAC-QSFP-4*SFP-4
Email: sales@sateoptics.com

3-year warranty · Standard lead time 3–7 days

QSFP+ to 4× SFP+ Breakout DAC — 4m, Built for Same-Row Links

The Sate Optics ST-DAC-QSFP-4*SFP-4 is a 40G to 4× 10G breakout direct attach copper cable, factory-terminated with QSFP+ to 4× SFP+ connectors and cut to 4m(13ft) — sized for runs along one row of cabinets.

Why This Module

  • One port, 4 links: a single 40G switch port fans out to 4× 10G — dense breakout wiring without separate transceivers
  • 4m same-row reach: runs along the row to adjacent racks and still carries the full rate
  • Factory-terminated and plug-and-play: both ends arrive as one tested assembly — plug in, link up, with lower latency than an optical hop
  • Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.

Key Specifications

ParameterSpecification
Connector EndsQSFP+ to 4× SFP+
Data Rate40Gbps to 4× 10Gbps
Cable TypePassive twinax copper breakout cable
Wire Gauge26AWG
Cable Length4m(13ft)
Signal ConditioningNone (passive)
Operating Temperature0~70℃

Used In

  • One 40G port split into 4× 10G links
  • QSFP+ spine-to-leaf fan-out wiring
  • Same-row links between racks in one row of cabinets
  • Typical platforms: Cisco Nexus 9300 / 9200 series, Arista 7050X / 7060X series, Juniper QFX5100 / EX4600, NVIDIA Spectrum SN2000 series, Huawei CloudEngine 6857 / 5855, Nokia 7250 IXR, H3C S6520X / S12500 and ZTE ZXR10 5960 series.

Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.

Where It Fits

  • Same-row expansion as leaf switches fan out along the row
  • End-of-row runs at full rate without optics
  • Replacing transceiver pairs where the run is short enough for copper — lower cost, lower power, nothing to clean or pair

Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.

More in 40G QSFP+ To 4x10G SFP+ Breakout DAC

Part Number Description Picture Data Rate(Mbps) AWG Media Type Length Temp.(℃) Note Datasheet
ST-DAC-QSFP-4*SFP-0.5 40G QSFP+ to 4x10G SFP+ Passive DAC, 30AWG, 0.5m ST-DAC-QSFP-4*SFP-0.5 40Gbps/4x10Gbps 30AWG Passive Direct Attach Copper Breakout Cable 0.5m(2ft) 0~70℃ QSFP-4SFP10G-CU50CM Compatible; QSFP+ to 4x10G SFP+; ≤0.5W
ST-DAC-QSFP-4*SFP-1 40G QSFP+ to 4x10G SFP+ Passive DAC, 30AWG, 1m ST-DAC-QSFP-4*SFP-1 40Gbps/4x10Gbps 30AWG Passive Direct Attach Copper Breakout Cable 1m(3ft) 0~70℃ QSFP-4SFP10G-CU1M Compatible; QSFP+ to 4x10G SFP+; ≤0.5W
ST-DAC-QSFP-4*SFP-2 40G QSFP+ to 4x10G SFP+ Passive DAC, 30AWG, 2m ST-DAC-QSFP-4*SFP-2 40Gbps/4x10Gbps 30AWG Passive Direct Attach Copper Breakout Cable 2m(7ft) 0~70℃ QSFP-4SFP10G-CU2M Compatible; QSFP+ to 4x10G SFP+; ≤0.5W
ST-DAC-QSFP-4*SFP-3 40G QSFP+ to 4x10G SFP+ Passive DAC, 30AWG, 3m ST-DAC-QSFP-4*SFP-3 40Gbps/4x10Gbps 30AWG Passive Direct Attach Copper Breakout Cable 3m(10ft) 0~70℃ QSFP-4SFP10G-CU3M Compatible; QSFP+ to 4x10G SFP+; ≤0.5W
ST-DAC-QSFP-4*SFP-4 40G QSFP+ to 4x10G SFP+ Passive DAC, 26AWG, 4m ST-DAC-QSFP-4*SFP-4 40Gbps/4x10Gbps 26AWG Passive Direct Attach Copper Breakout Cable 4m(13ft) 0~70℃ QSFP-4SFP10G-CU4M Compatible; QSFP+ to 4x10G SFP+; ≤0.5W
ST-DAC-QSFP-4*SFP-5 40G QSFP+ to 4x10G SFP+ Passive DAC, 26AWG, 5m ST-DAC-QSFP-4*SFP-5 40Gbps/4x10Gbps 26AWG Passive Direct Attach Copper Breakout Cable 5m(16ft) 0~70℃ QSFP-4SFP10G-CU5M Compatible; QSFP+ to 4x10G SFP+; ≤0.5W
ST-DAC-QSFP-4*SFP-7 40G QSFP+ to 4x10G SFP+ Passive DAC, 24AWG, 7m ST-DAC-QSFP-4*SFP-7 40Gbps/4x10Gbps 24AWG Passive Direct Attach Copper Breakout Cable 7m(23ft) 0~70℃ QSFP-4SFP10G-CU7M Compatible; QSFP+ to 4x10G SFP+; ≤0.5W