ST-DAC-QSFP-4*SFP-7
3-year warranty · Standard lead time 3–7 days
QSFP+ to 4× SFP+ Breakout DAC — 7m, Built for Extended-Reach Links
The Sate Optics ST-DAC-QSFP-4*SFP-7 is a 40G to 4× 10G breakout direct attach copper cable, factory-terminated with QSFP+ to 4× SFP+ connectors and cut to 7m(23ft) — sized for the longest runs copper can cover.
Why This Module
- One port, 4 links: a single 40G switch port fans out to 4× 10G — dense breakout wiring without separate transceivers
- 7m extended reach: the longest practical copper run — beyond this distance the link belongs on optics
- Factory-terminated and plug-and-play: both ends arrive as one tested assembly — plug in, link up, with lower latency than an optical hop
Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.
Key Specifications
| Parameter | Specification |
| Connector Ends | QSFP+ to 4× SFP+ |
| Data Rate | 40Gbps to 4× 10Gbps |
| Cable Type | Passive twinax copper breakout cable |
| Wire Gauge | 24AWG |
| Cable Length | 7m(23ft) |
| Signal Conditioning | None (passive) |
| Operating Temperature | 0~70℃ |
Used In
- One 40G port split into 4× 10G links
- QSFP+ spine-to-leaf fan-out wiring
- Extended-reach links across a row of cabinets
- Typical platforms: Cisco Nexus 9300 / 9200 series, Arista 7050X / 7060X series, Juniper QFX5100 / EX4600, NVIDIA Spectrum SN2000 series, Huawei CloudEngine 6857 / 5855, Nokia 7250 IXR, H3C S6520X / S12500 and ZTE ZXR10 5960 series.
Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.
Where It Fits
- Longest copper runs where optics would be the next step up
- End-of-row aggregation over full-rate copper
- Replacing transceiver pairs where the run is short enough for copper — lower cost, lower power, nothing to clean or pair
Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.
More in 40G QSFP+ To 4x10G SFP+ Breakout DAC
| Part Number | Description | Picture | Data Rate(Mbps) | AWG | Media Type | Length | Temp.(℃) | Note | Datasheet |
|---|---|---|---|---|---|---|---|---|---|
| ST-DAC-QSFP-4*SFP-0.5 | 40G QSFP+ to 4x10G SFP+ Passive DAC, 30AWG, 0.5m | ![]() |
40Gbps/4x10Gbps | 30AWG | Passive Direct Attach Copper Breakout Cable | 0.5m(2ft) | 0~70℃ | QSFP-4SFP10G-CU50CM Compatible; QSFP+ to 4x10G SFP+; ≤0.5W | |
| ST-DAC-QSFP-4*SFP-1 | 40G QSFP+ to 4x10G SFP+ Passive DAC, 30AWG, 1m | ![]() |
40Gbps/4x10Gbps | 30AWG | Passive Direct Attach Copper Breakout Cable | 1m(3ft) | 0~70℃ | QSFP-4SFP10G-CU1M Compatible; QSFP+ to 4x10G SFP+; ≤0.5W | |
| ST-DAC-QSFP-4*SFP-2 | 40G QSFP+ to 4x10G SFP+ Passive DAC, 30AWG, 2m | ![]() |
40Gbps/4x10Gbps | 30AWG | Passive Direct Attach Copper Breakout Cable | 2m(7ft) | 0~70℃ | QSFP-4SFP10G-CU2M Compatible; QSFP+ to 4x10G SFP+; ≤0.5W | |
| ST-DAC-QSFP-4*SFP-3 | 40G QSFP+ to 4x10G SFP+ Passive DAC, 30AWG, 3m | ![]() |
40Gbps/4x10Gbps | 30AWG | Passive Direct Attach Copper Breakout Cable | 3m(10ft) | 0~70℃ | QSFP-4SFP10G-CU3M Compatible; QSFP+ to 4x10G SFP+; ≤0.5W | |
| ST-DAC-QSFP-4*SFP-4 | 40G QSFP+ to 4x10G SFP+ Passive DAC, 26AWG, 4m | ![]() |
40Gbps/4x10Gbps | 26AWG | Passive Direct Attach Copper Breakout Cable | 4m(13ft) | 0~70℃ | QSFP-4SFP10G-CU4M Compatible; QSFP+ to 4x10G SFP+; ≤0.5W | |
| ST-DAC-QSFP-4*SFP-5 | 40G QSFP+ to 4x10G SFP+ Passive DAC, 26AWG, 5m | ![]() |
40Gbps/4x10Gbps | 26AWG | Passive Direct Attach Copper Breakout Cable | 5m(16ft) | 0~70℃ | QSFP-4SFP10G-CU5M Compatible; QSFP+ to 4x10G SFP+; ≤0.5W | |
| ST-DAC-QSFP-4*SFP-7 | 40G QSFP+ to 4x10G SFP+ Passive DAC, 24AWG, 7m | ![]() |
40Gbps/4x10Gbps | 24AWG | Passive Direct Attach Copper Breakout Cable | 7m(23ft) | 0~70℃ | QSFP-4SFP10G-CU7M Compatible; QSFP+ to 4x10G SFP+; ≤0.5W |


