ST-400G-QSFPDD-LB0-X
3-year warranty · Standard lead time 3–7 days
400G QSFP-DD Loopback — 0dB Attenuation, programmable load
The Sate Optics ST-400G-QSFPDD-LB0-X is a 400G QSFP-DD passive loopback plug that returns the port's electrical transmit signal straight back to its receiver — no optics, no fiber — with 0 dB of built-in attenuation and a programmable 1.5W to 15W power load.
Why This Module
- Port testing without optics: the electrical TX signal loops straight back to RX, so a switch port, line card or NIC can be brought up and checked with no transceiver pair and no fiber run
- Signal and power in one plug: the looped path comes back at full strength for straightforward link-up and error checks, and its load is programmable from 1.5W to 15W, covering every module power class from low-power to high-power optics
- Built for validation work: burn-in, thermal soak and production-line checks, plus fast isolation of a suspect port in the field
Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.
Key Specifications
| Parameter | Specification |
| Form Factor | QSFP-DD |
| Data Rate | 400Gbps |
| Loopback Type | Passive electrical loopback |
| Attenuation | 0 dB |
| Power Load | Programmable 1.5W-15W |
| Operating Temperature | 0~85℃ |
Used In
- QSFP-DD port bring-up and link testing on switches and NICs
- Programmable power-load testing — dial the draw from 1.5W to 15W to match the module class under test
- Burn-in and soak testing of 400G line cards and systems
- Typical platforms: Cisco Nexus 9300 series, Arista 7060X / 7388 series, Juniper QFX5220 / QFX5700, Huawei CloudEngine 16800, Nokia 7250 IXR, H3C S12500 / S9820 series.
Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.
Where It Fits
- Test labs and QA benches bringing up new switches and line cards
- Production lines running loopback checks on finished systems
- Field troubleshooting — plug in a loopback to split a fault between the port and the link
Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.
More in 400G QSFP-DD Loopback
| Part Number | Description | Picture | Data Rate | Media Type | Attenuation(dB) | Power Load | Temp.(℃) | Note | Datasheet |
|---|---|---|---|---|---|---|---|---|---|
| ST-400G-QSFPDD-LB0-0 | 400G QSFP-DD Passive Loopback, 0dB, 0W | ![]() |
400Gbps | Electrical | 0dB | 0W | 0~85℃ | 400G Passive Loopback | |
| ST-400G-QSFPDD-LB0-10 | 400G QSFP-DD Passive Loopback, 0dB, 10W | ![]() |
400Gbps | Electrical | 0dB | 10W | 0~85℃ | 400G Passive Loopback | |
| ST-400G-QSFPDD-LB0-X | 400G QSFP-DD Passive Loopback, 0dB, Programmable 1.5W-15W | ![]() |
400Gbps | Electrical | 0dB | Programmable 1.5W-15W | 0~85℃ | 400G Passive Loopback |


