• Loopback Modules

ST-400G-QSFPDD-LB0-10

ST-400G-QSFPDD-LB0-10
Email: sales@sateoptics.com

3-year warranty · Standard lead time 3–7 days

400G QSFP-DD Loopback — 0dB Attenuation, 10W load

The Sate Optics ST-400G-QSFPDD-LB0-10 is a 400G QSFP-DD passive loopback plug that returns the port's electrical transmit signal straight back to its receiver — no optics, no fiber — with 0 dB of built-in attenuation and a 10W power load that stands in for a live module.

Why This Module

  • Port testing without optics: the electrical TX signal loops straight back to RX, so a switch port, line card or NIC can be brought up and checked with no transceiver pair and no fiber run
  • Signal and power in one plug: the looped path comes back at full strength for straightforward link-up and error checks, and it draws 10W like a working module, so power budgeting and thermal behaviour are validated under a realistic load
  • Built for validation work: burn-in, thermal soak and production-line checks, plus fast isolation of a suspect port in the field
  • Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.

Key Specifications

ParameterSpecification
Form FactorQSFP-DD
Data Rate400Gbps
Loopback TypePassive electrical loopback
Attenuation0 dB
Power Load10W
Operating Temperature0~85℃

Used In

  • QSFP-DD port bring-up and link testing on switches and NICs
  • Power-load testing — a 10W draw stands in for a working module
  • Burn-in and soak testing of 400G line cards and systems
  • Typical platforms: Cisco Nexus 9300 series, Arista 7060X / 7388 series, Juniper QFX5220 / QFX5700, Huawei CloudEngine 16800, Nokia 7250 IXR, H3C S12500 / S9820 series.

Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.

Where It Fits

  • Test labs and QA benches bringing up new switches and line cards
  • Production lines running loopback checks on finished systems
  • Field troubleshooting — plug in a loopback to split a fault between the port and the link

Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.

More in 400G QSFP-DD Loopback

Part Number Description Picture Data Rate Media Type Attenuation(dB) Power Load Temp.(℃) Note Datasheet
ST-400G-QSFPDD-LB0-0 400G QSFP-DD Passive Loopback, 0dB, 0W ST-400G-QSFPDD-LB0-0 400Gbps Electrical 0dB 0W 0~85℃ 400G Passive Loopback
ST-400G-QSFPDD-LB0-10 400G QSFP-DD Passive Loopback, 0dB, 10W ST-400G-QSFPDD-LB0-10 400Gbps Electrical 0dB 10W 0~85℃ 400G Passive Loopback
ST-400G-QSFPDD-LB0-X 400G QSFP-DD Passive Loopback, 0dB, Programmable 1.5W-15W ST-400G-QSFPDD-LB0-X 400Gbps Electrical 0dB Programmable 1.5W-15W 0~85℃ 400G Passive Loopback