• 400G QSFP-DD DAC

ST-DAC-QSFPDD-4*QSFP56-1.5

ST-DAC-QSFPDD-4*QSFP56-1.5
Email: sales@sateoptics.com

3-year warranty · Standard lead time 3–7 days

QSFP-DD to 4× QSFP56 Breakout DAC — 1.5m, Built for In-Rack Links

The Sate Optics ST-DAC-QSFPDD-4*QSFP56-1.5 is a 400G to 4× 100G breakout direct attach copper cable, factory-terminated with QSFP-DD to 4× QSFP56 connectors and cut to 1.5m (5ft) — sized for links inside one rack.

Why This Module

  • One port, 4 links: a single 400G switch port fans out to 4× 100G — dense breakout wiring without separate transceivers
  • 1.5m in-rack reach: spans stacked switches and the servers in the same cabinet, with slack to route neatly
  • Factory-terminated and plug-and-play: both ends arrive as one tested assembly — plug in, link up, with lower latency than an optical hop
  • Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.

Key Specifications

ParameterSpecification
Connector EndsQSFP-DD to 4× QSFP56
Data Rate400Gbps to 4× 100Gbps
Cable TypePassive twinax copper breakout cable
Wire Gauge28AWG
Cable Length1.5m (5ft)
Signal ConditioningNone (passive)
Operating Temperature0~70℃

Used In

  • One 400G port split into 4× 100G links
  • QSFP-DD spine-to-leaf fan-out wiring
  • In-rack links within a single cabinet
  • Typical platforms: Cisco Nexus 9300 series, Arista 7060X / 7388 series, Juniper QFX5220 / QFX5700, Huawei CloudEngine 16800, Nokia 7250 IXR, H3C S12500 / S9820 series.

Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.

Where It Fits

  • Top-of-rack switching with servers cabled straight into the switch above them
  • Stacked and clustered switches patched inside one cabinet
  • Replacing transceiver pairs where the run is short enough for copper — lower cost, lower power, nothing to clean or pair

Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.

More in 400G QSFP-DD To 4x100G  QSFP56 Breakout DAC

Part Number Description Picture Data Rate(Mbps) AWG Media Type Length Temp.(℃) Note Datasheet
ST-DAC-QSFPDD-4*QSFP56-0.5 400G QSFP-DD to 4x100G QSFP56 Passive DAC, 30AWG, 0.5m ST-DAC-QSFPDD-4*QSFP56-0.5 400Gbps/4x100Gbps 30AWG Passive Direct Attach Copper Breakout Cable 0.5m (2ft) 0~70℃ Q-4Q56PC005 Compatible; QSFP-DD to 4x100G QSFP56; <0.1W
ST-DAC-QSFPDD-4*QSFP56-1 400G QSFP-DD to 4x100G QSFP56 Passive DAC, 30AWG, 1m ST-DAC-QSFPDD-4*QSFP56-1 400Gbps/4x100Gbps 30AWG Passive Direct Attach Copper Breakout Cable 1m (3ft) 0~70℃ Q-4Q56PC01 Compatible; QSFP-DD to 4x100G QSFP56; <0.1W
ST-DAC-QSFPDD-4*QSFP56-1.5 400G QSFP-DD to 4x100G QSFP56 Passive DAC, 28AWG, 1.5m ST-DAC-QSFPDD-4*QSFP56-1.5 400Gbps/4x100Gbps 28AWG Passive Direct Attach Copper Breakout Cable 1.5m (5ft) 0~70℃ Q-4Q56PC015 Compatible; QSFP-DD to 4x100G QSFP56; <0.1W
ST-DAC-QSFPDD-4*QSFP56-2 400G QSFP-DD to 4x100G QSFP56 Passive DAC, 28AWG, 2m ST-DAC-QSFPDD-4*QSFP56-2 400Gbps/4x100Gbps 28AWG Passive Direct Attach Copper Breakout Cable 2m (7ft) 0~70℃ Q-4Q56PC02 Compatible; QSFP-DD to 4x100G QSFP56; <0.1W
ST-DAC-QSFPDD-4*QSFP56-2.5 400G QSFP-DD to 4x100G QSFP56 Passive DAC, 28AWG, 2.5m ST-DAC-QSFPDD-4*QSFP56-2.5 400Gbps/4x100Gbps 28AWG Passive Direct Attach Copper Breakout Cable 2.5m (8ft) 0~70℃ Q-4Q56PC025 Compatible; QSFP-DD to 4x100G QSFP56; <0.1W
ST-DAC-QSFPDD-4*QSFP56-3 400G QSFP-DD to 4x100G QSFP56 Passive DAC, 28AWG, 3m ST-DAC-QSFPDD-4*QSFP56-3 400Gbps/4x100Gbps 28AWG Passive Direct Attach Copper Breakout Cable 3m(10ft) 0~70℃ Q-4Q56PC03 Compatible; QSFP-DD to 4x100G QSFP56; <0.1W