• 200G QSFP-DD DAC

ST-DAC-QSFPDD-2*QSFP28-1

ST-DAC-QSFPDD-2*QSFP28-1
Email: sales@sateoptics.com

3-year warranty · Standard lead time 3–7 days

QSFP-DD to 2× QSFP28 Breakout DAC — 1m, Built for In-Rack Links

The Sate Optics ST-DAC-QSFPDD-2*QSFP28-1 is a 200G to 2× 100G breakout direct attach copper cable, factory-terminated with QSFP-DD to 2× QSFP28 connectors and cut to 1m (3ft) — sized for links inside one rack.

Why This Module

  • One port, 2 links: a single 200G switch port fans out to 2× 100G — dense breakout wiring without separate transceivers
  • 1m in-rack reach: spans stacked switches and the servers in the same cabinet, with slack to route neatly
  • Factory-terminated and plug-and-play: both ends arrive as one tested assembly — plug in, link up, with lower latency than an optical hop
  • Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.

Key Specifications

ParameterSpecification
Connector EndsQSFP-DD to 2× QSFP28
Data Rate200Gbps to 2× 100Gbps
Cable TypePassive twinax copper breakout cable
Wire Gauge30AWG
Cable Length1m (3ft)
Signal ConditioningNone (passive)
Operating Temperature0~70℃

Used In

  • One 200G port split into 2× 100G links
  • QSFP-DD spine-to-leaf fan-out wiring
  • In-rack links within a single cabinet
  • Typical platforms: Cisco Nexus 9300 series, Arista 7280R3 series, NVIDIA Spectrum-2 SN3000 series, Huawei CloudEngine 6866, H3C S12500 / S9820 series.

Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.

Where It Fits

  • Top-of-rack switching with servers cabled straight into the switch above them
  • Stacked and clustered switches patched inside one cabinet
  • Replacing transceiver pairs where the run is short enough for copper — lower cost, lower power, nothing to clean or pair

Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.

More in 200G QSFP-DD To 2x100G QSFP28 Breakout DAC

Part Number Description Picture Data Rate(Mbps) AWG Media Type Length Temp.(℃) Note Datasheet
ST-DAC-QSFPDD-2*QSFP28-0.5 200G QSFP-DD to 2x100G QSFP28 Passive DAC, 30AWG, 0.5m ST-DAC-QSFPDD-2*QSFP28-0.5 200Gbps/2x100Gbps 30AWG Passive Direct Attach Copper Breakout Cable 0.5m(2ft) 0~70℃ Q-2Q28PC005 Compatible; QSFP-DD to 2x100G QSFP28; ≤0.5W
ST-DAC-QSFPDD-2*QSFP28-1 200G QSFP-DD to 2x100G QSFP28 Passive DAC, 30AWG, 1m ST-DAC-QSFPDD-2*QSFP28-1 200Gbps/2x100Gbps 30AWG Passive Direct Attach Copper Breakout Cable 1m(3ft) 0~70℃ Q-2Q28PC01 Compatible; QSFP-DD to 2x100G QSFP28; ≤0.5W
ST-DAC-QSFPDD-2*QSFP28-1.5 200G QSFP-DD to 2x100G QSFP28 Passive DAC, 30AWG, 1.5m ST-DAC-QSFPDD-2*QSFP28-1.5 200Gbps/2x100Gbps 30AWG Passive Direct Attach Copper Breakout Cable 1.5m (5ft) 0~70℃ Q-2Q28PC015 Compatible; QSFP-DD to 2x100G QSFP28; ≤0.5W
ST-DAC-QSFPDD-2*QSFP28-2 200G QSFP-DD to 2x100G QSFP28 Passive DAC, 28AWG, 2m ST-DAC-QSFPDD-2*QSFP28-2 200Gbps/2x100Gbps 28AWG Passive Direct Attach Copper Breakout Cable 2m(7ft) 0~70℃ Q-2Q28PC02 Compatible; QSFP-DD to 2x100G QSFP28; ≤0.5W
ST-DAC-QSFPDD-2*QSFP28-2.5 200G QSFP-DD to 2x100G QSFP28 Passive DAC, 28AWG, 2.5m ST-DAC-QSFPDD-2*QSFP28-2.5 200Gbps/2x100Gbps 28AWG Passive Direct Attach Copper Breakout Cable 2.5m (8ft) 0~70℃ Q-2Q28PC025 Compatible; QSFP-DD to 2x100G QSFP28; ≤0.5W
ST-DAC-QSFPDD-2*QSFP28-3 200G QSFP-DD to 2x100G QSFP28 Passive DAC, 28AWG, 3m ST-DAC-QSFPDD-2*QSFP28-3 200Gbps/2x100Gbps 28AWG Passive Direct Attach Copper Breakout Cable 3m(10ft) 0~70℃ Q-2Q28PC03 Compatible; QSFP-DD to 2x100G QSFP28; ≤0.5W