• 100G QSFP28 DAC

ST-DAC-QSFP28-4*SFP28-0.5

ST-DAC-QSFP28-4*SFP28-0.5
Email: sales@sateoptics.com

3-year warranty · Standard lead time 3–7 days

QSFP28 to 4× SFP28 Breakout DAC — 0.5m, Built for In-Rack Links

The Sate Optics ST-DAC-QSFP28-4*SFP28-0.5 is a 100G to 4× 25G breakout direct attach copper cable, factory-terminated with QSFP28 to 4× SFP28 connectors and cut to 0.5m(2ft) — sized for links inside one rack.

Why This Module

  • One port, 4 links: a single 100G switch port fans out to 4× 25G — dense breakout wiring without separate transceivers
  • 0.5m in-rack reach: spans stacked switches and the servers in the same cabinet, with slack to route neatly
  • Factory-terminated and plug-and-play: both ends arrive as one tested assembly — plug in, link up, with lower latency than an optical hop
  • Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.

Key Specifications

ParameterSpecification
Connector EndsQSFP28 to 4× SFP28
Data Rate100Gbps to 4× 25Gbps
Cable TypePassive twinax copper breakout cable
Wire Gauge30AWG
Cable Length0.5m(2ft)
Signal ConditioningNone (passive)
Operating Temperature0~70℃

Used In

  • One 100G port split into 4× 25G links
  • QSFP28 spine-to-leaf fan-out wiring
  • In-rack links within a single cabinet
  • Typical platforms: Cisco Nexus 9300 series, Arista 7060X / 7280R series, Juniper QFX5120 / QFX5200, NVIDIA Spectrum SN2000 / SN3000 series, Huawei CloudEngine 6857 / 8850, Nokia 7250 IXR, H3C S9820 / S12500 and ZTE ZXR10 9900 series.

Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.

Where It Fits

  • Top-of-rack switching with servers cabled straight into the switch above them
  • Stacked and clustered switches patched inside one cabinet
  • Replacing transceiver pairs where the run is short enough for copper — lower cost, lower power, nothing to clean or pair

Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.

More in 100G QSFP28 To 4x25G SFP28 Breakout DAC

Part Number Description Picture Data Rate(Mbps) AWG Media Type Length Temp.(℃) Note Datasheet
ST-DAC-QSFP28-4*SFP28-0.5 100G QSFP28 to 4x25G SFP28 Passive DAC, 30AWG, 0.5m ST-DAC-QSFP28-4*SFP28-0.5 100Gbps/4x25Gbps 30AWG Passive Direct Attach Copper Breakout Cable 0.5m(2ft) 0~70℃ QSFP-4SFP25G-CU50CM Compatible; QSFP28 to 4x25G SFP28; ≤0.5W
ST-DAC-QSFP28-4*SFP28-1 100G QSFP28 to 4x25G SFP28 Passive DAC, 30AWG, 1m ST-DAC-QSFP28-4*SFP28-1 100Gbps/4x25Gbps 30AWG Passive Direct Attach Copper Breakout Cable 1m(3ft) 0~70℃ QSFP-4SFP25G-CU1M Compatible; QSFP28 to 4x25G SFP28; ≤0.5W
ST-DAC-QSFP28-4*SFP28-1.5 100G QSFP28 to 4x25G SFP28 Passive DAC, 30AWG, 1.5m ST-DAC-QSFP28-4*SFP28-1.5 100Gbps/4x25Gbps 30AWG Passive Direct Attach Copper Breakout Cable 1.5m(5ft) 0~70℃ QSFP-4SFP25G-CU1.5M Compatible; QSFP28 to 4x25G SFP28; ≤0.5W
ST-DAC-QSFP28-4*SFP28-2 100G QSFP28 to 4x25G SFP28 Passive DAC, 30AWG, 2m ST-DAC-QSFP28-4*SFP28-2 100Gbps/4x25Gbps 30AWG Passive Direct Attach Copper Breakout Cable 2m(7ft) 0~70℃ QSFP-4SFP25G-CU2M Compatible; QSFP28 to 4x25G SFP28; ≤0.5W
ST-DAC-QSFP28-4*SFP28-2.5 100G QSFP28 to 4x25G SFP28 Passive DAC, 30AWG, 2.5m ST-DAC-QSFP28-4*SFP28-2.5 100Gbps/4x25Gbps 30AWG Passive Direct Attach Copper Breakout Cable 2.5m(8ft) 0~70℃ QSFP-4SFP25G-CU2.5M Compatible; QSFP28 to 4x25G SFP28; ≤0.5W
ST-DAC-QSFP28-4*SFP28-3 100G QSFP28 to 4x25G SFP28 Passive DAC, 28AWG, 3m ST-DAC-QSFP28-4*SFP28-3 100Gbps/4x25Gbps 28AWG Passive Direct Attach Copper Breakout Cable 3m(10ft) 0~70℃ QSFP-4SFP25G-CU3M Compatible; QSFP28 to 4x25G SFP28; ≤0.5W
ST-DAC-QSFP28-4*SFP28-3.5 100G QSFP28 to 4x25G SFP28 Passive DAC, 28AWG, 3.5m ST-DAC-QSFP28-4*SFP28-3.5 100Gbps/4x25Gbps 28AWG Passive Direct Attach Copper Breakout Cable 3.5m(11ft) 0~70℃ QSFP-4SFP25G-CU3.5M Compatible; QSFP28 to 4x25G SFP28; ≤0.5W
ST-DAC-QSFP28-4*SFP28-4 100G QSFP28 to 4x25G SFP28 Passive DAC, 26AWG, 4m ST-DAC-QSFP28-4*SFP28-4 100Gbps/4x25Gbps 26AWG Passive Direct Attach Copper Breakout Cable 4m(13ft) 0~70℃ QSFP-4SFP25G-CU4M Compatible; QSFP28 to 4x25G SFP28; ≤0.5W
ST-DAC-QSFP28-4*SFP28-5 100G QSFP28 to 4x25G SFP28 Passive DAC, 26AWG, 5m ST-DAC-QSFP28-4*SFP28-5 100Gbps/4x25Gbps 26AWG Passive Direct Attach Copper Breakout Cable 5m(16ft) 0~70℃ QSFP-4SFP25G-CU5M Compatible; QSFP28 to 4x25G SFP28; ≤0.5W