ST-EPON-ONU-PX20+LI
3-year warranty · Standard lead time 3–7 days
EPON ONU PX20+ SFP Transceiver — Low-Active TX_Burst, Industrial
The Sate Optics ST-EPON-ONU-PX20+LI is an EPON (GEPON) ONU SFP transceiver (PX20+) that puts the ONU optics in an SFP cage: symmetric 1.25Gbps, 1310nm burst-mode upstream and 1490nm downstream, SC/UPC, up to 20km. This build uses a low-active TX_Burst control signal, industrial temperature range.
Why This Module
- Burst-mode upstream: low-active TX_Burst control matched to your host design
- PX20+ budget: 0 ~ +4 dBm launch and -27 dBm sensitivity for 20km trees
- Industrial temperature: -40~85℃ range for outdoor cabinets and harsh sites
Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.
Key Specifications
| Parameter | Specification |
| Form Factor | SFP |
| PON Standard | EPON (IEEE 802.3ah) |
| Data Rate | 1.25Gbps upstream / 1.25Gbps downstream |
| Wavelength | 1310nm TX / 1490nm RX |
| Connector | SC |
| Fiber Type | Single Mode Fiber (SMF) |
| Transmission Distance | Up to 20km |
| TX Power | 0 ~ +4 dBm |
| RX Sensitivity | -27 dBm |
| Operating Temperature | -40~85℃ |
Used In
- ONT and CPE designs with an SFP cage instead of fixed optics
- Business gateways and demarcation devices on EPON access
- MDU and campus subscriber endpoints fed by EPON OLTs
- Typical platforms: EPON ONT and CPE devices, business gateways and other hosts with SFP cages, on EPON OLT networks from Huawei, ZTE, FiberHome and BDCOM.
Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.
Where It Fits
- Custom CPE builds needing a chosen burst-signal polarity
- EPON subscriber endpoints up to 20km from the OLT
- Replacements for fixed-optics ONTs in SFP-based designs
Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.
More in EPON ONU
| Part Number | Model No. | Picture | Data Rate(Mbps) | Wavelength | Media Type | Reach | TX Power(dBm) | RX Sens.(dBm) | Temp.(℃) | Note | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ST-EPON-ONU-PX20+LC | GEPON ONU PX20+ SFP, Low Active TX_Burst, 20km | ![]() |
1.25GTx~1.25GRx | 1310nm-TX / 1490nm-RX | Single-mode Fiber (SMF) | 20km | 0 ~ +4 dBm | -27 dBm | -10~70℃ | Compatible GEPON SFP ONU 1.25G SC/UPC, Commercial Temperature | |
| ST-EPON-ONU-PX20+LI | GEPON ONU PX20+ SFP, Low Active TX_Burst, 20km | ![]() |
1.25GTx~1.25GRx | 1310nm-TX / 1490nm-RX | Single-mode Fiber (SMF) | 20km | 0 ~ +4 dBm | -27 dBm | -40~85℃ | Compatible GEPON SFP ONU 1.25G SC/UPC, Industrial Temperature | |
| ST-EPON-ONU-PX20+HC | GEPON ONU PX20+ SFP, High Active TX_Burst, 20km | ![]() |
1.25GTx~1.25GRx | 1310nm-TX / 1490nm-RX | Single-mode Fiber (SMF) | 20km | 0 ~ +4 dBm | -27 dBm | -10~70℃ | Compatible GEPON SFP ONU 1.25G SC/UPC, Commercial Temperature | |
| ST-EPON-ONU-PX20+HI | GEPON ONU PX20+ SFP, High Active TX_Burst, 20km | ![]() |
1.25GTx~1.25GRx | 1310nm-TX / 1490nm-RX | Single-mode Fiber (SMF) | 20km | 0 ~ +4 dBm | -27 dBm | -40~85℃ | Compatible GEPON SFP ONU 1.25G SC/UPC, Industrial Temperature |


