• Loopback Modules

ST-40G-QSFP-LB0-2.5

ST-40G-QSFP-LB0-2.5
Email: sales@sateoptics.com

3-year warranty · Standard lead time 3–7 days

40G QSFP+ Loopback — 0dB Attenuation, 2.5W load

The Sate Optics ST-40G-QSFP-LB0-2.5 is a 40G QSFP+ passive loopback plug that returns the port's electrical transmit signal straight back to its receiver — no optics, no fiber — with 0 dB of built-in attenuation and a 2.5W power load that stands in for a live module.

Why This Module

  • Port testing without optics: the electrical TX signal loops straight back to RX, so a switch port, line card or NIC can be brought up and checked with no transceiver pair and no fiber run
  • Signal and power in one plug: the looped path comes back at full strength for straightforward link-up and error checks, and it draws 2.5W like a working module, so power budgeting and thermal behaviour are validated under a realistic load
  • Built for validation work: burn-in, thermal soak and production-line checks, plus fast isolation of a suspect port in the field
  • Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.

Key Specifications

ParameterSpecification
Form FactorQSFP+
Data Rate40Gbps
Loopback TypePassive electrical loopback
Attenuation0 dB
Power Load2.5W
Operating Temperature-20~85℃

Used In

  • QSFP+ port bring-up and link testing on switches and NICs
  • Power-load testing — a 2.5W draw stands in for a working module
  • Burn-in and soak testing of 40G line cards and systems
  • Typical platforms: Cisco Nexus 9300 / 9200 series, Arista 7050X / 7060X series, Juniper QFX5100 / EX4600, NVIDIA Spectrum SN2000 series, Huawei CloudEngine 6857 / 5855, Nokia 7250 IXR, H3C S6520X / S12500 and ZTE ZXR10 5960 series.

Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.

Where It Fits

  • Test labs and QA benches bringing up new switches and line cards
  • Production lines running loopback checks on finished systems
  • Field troubleshooting — plug in a loopback to split a fault between the port and the link

Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.

More in 40G QSFP Loopback

Part Number Description Picture Data Rate Media Type Attenuation(dB) Power Load Temp.(℃) Note Datasheet
ST-40G-QSFP-LB0-0 40G QSFP+ Passive Loopback, 0dB, 0W ST-40G-QSFP-LB0-0 40Gbps Electrical 0dB 0W -20~85℃ 40G Passive Loopback
ST-40G-QSFP-LB0-2.5 40G QSFP+ Passive Loopback, 0dB, 2.5W ST-40G-QSFP-LB0-2.5 40Gbps Electrical 0dB 2.5W -20~85℃ 40G Passive Loopback
ST-40G-QSFP-LB3-0 40G QSFP+ Passive Loopback, 3dB, 0W ST-40G-QSFP-LB3-0 40Gbps Electrical 3dB 0W -20~85℃ 40G Passive Loopback
ST-40G-QSFP-LB5-0 40G QSFP+ Passive Loopback, 5dB, 0W ST-40G-QSFP-LB5-0 40Gbps Electrical 5dB 0W -20~85℃ 40G Passive Loopback