• Loopback Modules

ST-25G-SFP28-LB5-1

ST-25G-SFP28-LB5-1
Email: sales@sateoptics.com

3-year warranty · Standard lead time 3–7 days

25G SFP28 Loopback — 5dB Attenuation, 1W load

The Sate Optics ST-25G-SFP28-LB5-1 is a 25G SFP28 passive loopback plug that returns the port's electrical transmit signal straight back to its receiver — no optics, no fiber — with 5 dB of built-in attenuation and a 1W power load that stands in for a live module.

Why This Module

  • Port testing without optics: the electrical TX signal loops straight back to RX, so a switch port, line card or NIC can be brought up and checked with no transceiver pair and no fiber run
  • Signal and power in one plug: the looped signal is knocked down by 5 dB, closer to a real link budget than a bare zero-loss loop, and it draws 1W like a working module, so power budgeting and thermal behaviour are validated under a realistic load
  • Built for validation work: burn-in, thermal soak and production-line checks, plus fast isolation of a suspect port in the field
  • Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.

Key Specifications

ParameterSpecification
Form FactorSFP28
Data Rate25Gbps
Loopback TypePassive electrical loopback
Attenuation5 dB
Power Load1W
Operating Temperature-20~85℃

Used In

  • SFP28 port bring-up and link testing on switches and NICs
  • Power-load testing — a 1W draw stands in for a working module
  • Burn-in and soak testing of 25G line cards and systems
  • Typical platforms: Cisco Nexus 9300 / 9200 series, Arista 7060X / 7280R series, Juniper QFX5120 / EX4650, NVIDIA Spectrum SN2000 / SN3000 series and ConnectX NICs, Huawei CloudEngine 6866, Nokia 7250 IXR, H3C S6520X / S12500 and ZTE ZXR10 5960 series.

Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.

Where It Fits

  • Test labs and QA benches bringing up new switches and line cards
  • Production lines running loopback checks on finished systems
  • Field troubleshooting — plug in a loopback to split a fault between the port and the link

Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.

More in 25G SFP28 Loopback

Part Number Description Picture Data Rate Media Type Attenuation(dB) Power Load Temp.(℃) Note Datasheet
ST-25G-SFP28-LB0-0 25G SFP28 Passive Loopback, 0dB, 0W ST-25G-SFP28-LB0-0 25Gbps Electrical 0dB 0W -20~85℃ 25G Passive Loopback
ST-25G-SFP28-LB0-3 25G SFP28 Passive Loopback, 0dB, 3W ST-25G-SFP28-LB0-3 25Gbps Electrical 0dB 3W -20~85℃ 25G Passive Loopback
ST-25G-SFP28-LB0-2.5 25G SFP28 Passive Loopback, 0dB, 2.5W ST-25G-SFP28-LB0-2.5 25Gbps Electrical 0dB 2.5W -20~85℃ 25G Passive Loopback
ST-25G-SFP28-LB0-1.5 25G SFP28 Passive Loopback, 0dB, 1.5W ST-25G-SFP28-LB0-1.5 25Gbps Electrical 0dB 1.5W -20~85℃ 25G Passive Loopback
ST-25G-SFP28-LB0-2 25G SFP28 Passive Loopback, 0dB, 2W ST-25G-SFP28-LB0-2 25Gbps Electrical 0dB 2W -20~85℃ 25G Passive Loopback
ST-25G-SFP28-LB3-0 25G SFP28 Passive Loopback, 3dB, 0W ST-25G-SFP28-LB3-0 25Gbps Electrical 3dB 0W -20~85℃ 25G Passive Loopback
ST-25G-SFP28-LB5-1 25G SFP28 Passive Loopback, 5dB, 1W ST-25G-SFP28-LB5-1 25Gbps Electrical 5dB 1W -20~85℃ 25G Passive Loopback
ST-25G-SFP28-LB5-0 25G SFP28 Passive Loopback, 5dB, 0W ST-25G-SFP28-LB5-0 25Gbps Electrical 5dB 0W -20~85℃ 25G Passive Loopback