ST-AOC-200G-QSFP56-20
3-year warranty · Standard lead time 3–7 days
200Gbps QSFP56 to QSFP56 AOC — 20m, Built for Cross-Row Links
The Sate Optics ST-AOC-200G-QSFP56-20 is a 200Gbps active optical cable, factory-terminated with QSFP56 to QSFP56 connectors on OM3 multimode fiber and cut to 20m (66ft) — sized for cross-row runs between racks and pods.
Why This Module
- Factory-terminated and plug-and-play: both ends arrive as one tested assembly — no separate transceivers and patch cords to pair up
- Room-scale reach: 20m covers cross-row runs that passive copper cannot serve at this rate
- Low power, easy routing: draws ≤4.5W and the thin, lightweight fiber cable routes cleanly through dense racks
Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.
Key Specifications
| Parameter | Specification |
| Connector Ends | QSFP56 to QSFP56 |
| Data Rate | 200Gbps |
| Wavelength | 850nm |
| Fiber Type | OM3 multimode fiber |
| Cable Type | Active optical cable |
| Cable Length | 20m (66ft) |
| Power Consumption | ≤4.5W |
| Operating Temperature | 0~70℃ |
Used In
- 200G spine and leaf switching on QSFP56 ports
- AI and HPC cluster interconnects
- Cross-row fabric links between racks and pods
- Typical platforms: Cisco Nexus 9300 series, Arista 7280R3 series, NVIDIA Spectrum-2 SN3000 series, Huawei CloudEngine 6866, H3C S12500 / S9820 series.
Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.
Where It Fits
- Pod-to-pod links across the data hall
- Spine placement freedom beyond a single row
- Replacing module-plus-fiber pairs with one pre-terminated link
Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.
More in 200G QSFP56 to QSFP56 AOC
| Part Number | Model No. | Picture | Data Rate(Mbps) | Wavelength | Media Type | Reach | TX Power(dBm) | RX Sens.(dBm) | Temp.(℃) | Note | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ST-AOC-200G-QSFP56-1 | 200G QSFP56 to QSFP56 AOC, 1m | ![]() |
200Gbps/200Gbps | 850nm | OM3/Active Optical Cable | 1m (3ft) | N/A | N/A | 0~70℃ | MFS1S00-V001E Compatible; ≤4.5W | |
| ST-AOC-200G-QSFP56-2 | 200G QSFP56 to QSFP56 AOC, 2m | ![]() |
200Gbps/200Gbps | 850nm | OM3/Active Optical Cable | 2m (7ft) | N/A | N/A | 0~70℃ | MFS1S00-V002E Compatible; ≤4.5W | |
| ST-AOC-200G-QSFP56-3 | 200G QSFP56 to QSFP56 AOC, 3m | ![]() |
200Gbps/200Gbps | 850nm | OM3/Active Optical Cable | 3m (10ft) | N/A | N/A | 0~70℃ | MFS1S00-V003E Compatible; ≤4.5W | |
| ST-AOC-200G-QSFP56-5 | 200G QSFP56 to QSFP56 AOC, 5m | ![]() |
200Gbps/200Gbps | 850nm | OM3/Active Optical Cable | 5m (16ft) | N/A | N/A | 0~70℃ | MFS1S00-V005E Compatible; ≤4.5W | |
| ST-AOC-200G-QSFP56-10 | 200G QSFP56 to QSFP56 AOC, 10m | ![]() |
200Gbps/200Gbps | 850nm | OM3/Active Optical Cable | 10m (33ft) | N/A | N/A | 0~70℃ | MFS1S00-V010E Compatible; ≤4.5W | |
| ST-AOC-200G-QSFP56-15 | 200G QSFP56 to QSFP56 AOC, 15m | ![]() |
200Gbps/200Gbps | 850nm | OM3/Active Optical Cable | 15m (49ft) | N/A | N/A | 0~70℃ | MFS1S00-V015E Compatible; ≤4.5W | |
| ST-AOC-200G-QSFP56-20 | 200G QSFP56 to QSFP56 AOC, 20m | ![]() |
200Gbps/200Gbps | 850nm | OM3/Active Optical Cable | 20m (66ft) | N/A | N/A | 0~70℃ | MFS1S00-V020E Compatible; ≤4.5W | |
| ST-AOC-200G-QSFP56-30 | 200G QSFP56 to QSFP56 AOC, 30m | ![]() |
200Gbps/200Gbps | 850nm | OM3/Active Optical Cable | 30m (98ft) | N/A | N/A | 0~70℃ | MFS1S00-V030E Compatible; ≤4.5W | |
| ST-AOC-200G-QSFP56-50 | 200G QSFP56 to QSFP56 AOC, 50m | ![]() |
200Gbps/200Gbps | 850nm | OM3/Active Optical Cable | 50m (164ft) | N/A | N/A | 0~70℃ | MFS1S00-V050E Compatible; ≤4.5W | |
| ST-AOC-200G-QSFP56-100 | 200G QSFP56 to QSFP56 AOC, 100m | ![]() |
200Gbps/200Gbps | 850nm | OM3/Active Optical Cable | 100m (328ft) | N/A | N/A | 0~70℃ | MFS1S00-V100E Compatible; ≤4.5W |


