• 1G SFP Transceivers

1G-T Copper SFP Transceivers

This range covers the models in the table below at 100m reach. Speed grades and temperature ranges for every model are in the comparison table, so the right module for a link can be picked from the numbers, not from guesswork.

These copper models put standard RJ45 Ethernet ports into SFP cages, for connecting switches, servers and legacy copper equipment over ordinary twisted-pair cabling. Reach is the usual 100m copper limit; check the table for the supported speed grades.

Every module in this range is coded for major networking platforms and 100% tested before shipment, and is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.

Part Number Description Picture Data Rate Wavelength Media Type Reach TX Power(dBm) RX Sens.(dBm) Temp.(℃) Note Datasheet
ST-1G-SFP-T 1000BASE-T SFP RJ45 Copper Transceiver ST-1G-SFP-T 1.25Gbps N/A Copper RJ45 100m N/A N/A 0~70℃ 1000BASE-T; RX_LOS Disabled
ST-1G-SFP-T-SGMII 10/100/1000BASE-T SFP RJ45 SGMII Transceiver ST-1G-SFP-T-SGMII 10/100/1000Mbps N/A Copper RJ45 100m N/A N/A 0~70℃ 10/100/1000BASE-T; SGMII Interface
ST-1G-SFP-T-SERDES 1000BASE-T SFP RJ45 SERDES Copper Transceiver ST-1G-SFP-T-SERDES 1.25Gbps N/A Copper RJ45 100m N/A N/A 0~70℃ 1000BASE-T; SERDES Interface
ST-1G-SFP-T-PHY-OFF 1000BASE-T SFP RJ45 PHY Disabled Copper Transceiver ST-1G-SFP-T-PHY-OFF 1.25Gbps N/A Copper RJ45 100m N/A N/A 0~70℃ 10/100/1000Base-T; PHY Disabled