• 1G SFP Transceivers

ST-1G-SFP-T-PHY-OFF

ST-1G-SFP-T-PHY-OFF
Email: sales@sateoptics.com

3-year warranty · Standard lead time 3–7 days

1G SFP Copper Transceiver — 10/100/1000 RJ45, PHY Disabled

The Sate Optics ST-1G-SFP-T-PHY-OFF is a 10/100/1000BASE-T SFP copper transceiver with the PHY disabled that turns an SFP cage into a Gigabit RJ45 copper port for links up to 100m over Cat5e/Cat6 cabling. This variant is for platforms designed around a PHY-less copper SFP — tell us your switch model and we will confirm the right variant before you order.

Why This Module

  • PHY disabled: passes the SGMII stream through for hosts that implement the PHY on the board
  • 100m over copper: standard structured cabling, no fiber run needed
  • Low-power design: runs within standard SFP port power budgets
  • Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.

Key Specifications

ParameterSpecification
Form FactorSFP
Data Rate10/100/1000Mbps (auto-negotiating)
StandardIEEE 802.3ab 1000BASE-T / 100BASE-TX / 10BASE-T
Host InterfaceSGMII (PHY disabled)
ConnectorRJ45
Cable TypeCat5e / Cat6 UTP copper
Transmission DistanceUp to 100m
Operating Temperature0~70℃

Used In

  • Switches and routers with SFP cages that need copper Gigabit drops
  • Servers, storage and network appliances on structured copper cabling
  • Out-of-band management and legacy segments staying on copper
  • Typical platforms: Cisco Catalyst 9300 / 2960X series and Industrial Ethernet switches, Juniper EX2300 / EX3400, Huawei S5735 / S6730, H3C S5120 / S6520X, ZTE ZXR10 5960 series and other Gigabit access switches with SFP cages.

Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.

Where It Fits

  • Copper Gigabit drops from SFP-cage switches
  • Migration bridges between fiber uplinks and copper access
  • Lab and staging networks on existing cabling

Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.

More in 1G-T Copper SFP Transceivers

Part Number Model No. Picture Data Rate(Mbps) Wavelength Media Type Reach TX Power(dBm) RX Sens.(dBm) Temp.(℃) Note Datasheet
ST-1G-SFP-T 1000BASE-T SFP RJ45 Copper Transceiver ST-1G-SFP-T 1.25Gbps N/A Copper RJ45 100m N/A N/A 0~70℃ 1000BASE-T; RX_LOS Disabled
ST-1G-SFP-T-SGMII 10/100/1000BASE-T SFP RJ45 SGMII Transceiver ST-1G-SFP-T-SGMII 10/100/1000Mbps N/A Copper RJ45 100m N/A N/A 0~70℃ 10/100/1000BASE-T; SGMII Interface
ST-1G-SFP-T-SERDES 1000BASE-T SFP RJ45 SERDES Copper Transceiver ST-1G-SFP-T-SERDES 1.25Gbps N/A Copper RJ45 100m N/A N/A 0~70℃ 1000BASE-T; SERDES Interface
ST-1G-SFP-T-PHY-OFF 1000BASE-T SFP RJ45 PHY Disabled Copper Transceiver ST-1G-SFP-T-PHY-OFF 1.25Gbps N/A Copper RJ45 100m N/A N/A 0~70℃ 10/100/1000Base-T; PHY Disabled