ST-10G-SFP-LB0-2.5
3-year warranty · Standard lead time 3–7 days
10G SFP+ Loopback — 0dB Attenuation, 2.5W load
The Sate Optics ST-10G-SFP-LB0-2.5 is a 10G SFP+ passive loopback plug that returns the port's electrical transmit signal straight back to its receiver — no optics, no fiber — with 0 dB of built-in attenuation and a 2.5W power load that stands in for a live module.
Why This Module
- Port testing without optics: the electrical TX signal loops straight back to RX, so a switch port, line card or NIC can be brought up and checked with no transceiver pair and no fiber run
- Signal and power in one plug: the looped path comes back at full strength for straightforward link-up and error checks, and it draws 2.5W like a working module, so power budgeting and thermal behaviour are validated under a realistic load
- Built for validation work: burn-in, thermal soak and production-line checks, plus fast isolation of a suspect port in the field
Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.
Key Specifications
| Parameter | Specification |
| Form Factor | SFP+ |
| Data Rate | 10Gbps |
| Loopback Type | Passive electrical loopback |
| Attenuation | 0 dB |
| Power Load | 2.5W |
| Operating Temperature | -20~85℃ |
Used In
- SFP+ port bring-up and link testing on switches and NICs
- Power-load testing — a 2.5W draw stands in for a working module
- Burn-in and soak testing of 10G line cards and systems
- Typical platforms: Cisco Nexus 9300 / 9200 series and Catalyst 9300 / 9500, Arista 7050X / 7060X series, Juniper EX4600 / QFX5100, NVIDIA Spectrum SN2000 / SN3000 series and ConnectX NICs, Huawei CloudEngine 6857 / 5855, Nokia 7250 IXR, H3C S6520X / S12500 and ZTE ZXR10 5960 series.
Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.
Where It Fits
- Test labs and QA benches bringing up new switches and line cards
- Production lines running loopback checks on finished systems
- Field troubleshooting — plug in a loopback to split a fault between the port and the link
Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.
More in 10G SFP Loopback
| Part Number | Description | Picture | Data Rate | Media Type | Attenuation(dB) | Power Load | Temp.(℃) | Note | Datasheet |
|---|---|---|---|---|---|---|---|---|---|
| ST-10G-SFP-LB0-3 | 10G SFP+ Passive Loopback, 0dB, 3W | ![]() |
10Gbps | Electrical | 0dB | 3W | -20~85℃ | 10G Passive Loopback | |
| ST-10G-SFP-LB0-0 | 10G SFP+ Passive Loopback, 0dB, 0W | ![]() |
10Gbps | Electrical | 0dB | 0W | -20~85℃ | 10G Passive Loopback | |
| ST-10G-SFP-LB0-2 | 10G SFP+ Passive Loopback, 0dB, 2W | ![]() |
10Gbps | Electrical | 0dB | 2W | -20~85℃ | 10G Passive Loopback | |
| ST-10G-SFP-LB0-1.5 | 10G SFP+ Passive Loopback, 0dB, 1.5W | ![]() |
10Gbps | Electrical | 0dB | 1.5W | -20~85℃ | 10G Passive Loopback | |
| ST-10G-SFP-LB0-2.5 | 10G SFP+ Passive Loopback, 0dB, 2.5W | ![]() |
10Gbps | Electrical | 0dB | 2.5W | -20~85℃ | 10G Passive Loopback | |
| ST-10G-SFP-LB3-0 | 10G SFP+ Passive Loopback, 3dB, 0W | ![]() |
10Gbps | Electrical | 3dB | 0W | -20~85℃ | 10G Passive Loopback | |
| ST-10G-SFP-LB5-0 | 10G SFP+ Passive Loopback, 5dB, 0W | ![]() |
10Gbps | Electrical | 5dB | 0W | -20~85℃ | 10G Passive Loopback | |
| ST-10G-SFP-LB5-2.5 | 10G SFP+ Passive Loopback, 5dB, 2.5W | ![]() |
10Gbps | Electrical | 5dB | 2.5W | -20~85℃ | 10G Passive Loopback |


