• DAC cables

ST-DAC-10G-SFP-2.5

ST-DAC-10G-SFP-2.5
Email: sales@sateoptics.com

3-year warranty · Standard lead time 3–7 days

10G SFP+ DAC — 2.5m, Built for Rack-to-Rack Links

The Sate Optics ST-DAC-10G-SFP-2.5 is a 10G direct attach copper cable, factory-terminated with SFP+ to SFP+ connectors and cut to 2.5m (8ft) — sized for links between neighbouring racks.

Why This Module

  • Lowest-cost way to link two ports: no transceivers, no fiber — one cable, and a passive DAC draws essentially no power
  • 2.5m rack-to-rack reach: crosses to the neighbouring cabinet with room for overhead or underfloor routing
  • Factory-terminated and plug-and-play: both ends arrive as one tested assembly — plug in, link up, with lower latency than an optical hop
  • Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.

Key Specifications

ParameterSpecification
Connector EndsSFP+ to SFP+
Data Rate10Gbps
Cable TypePassive twinax copper cable
Wire Gauge30AWG
Cable Length2.5m (8ft)
Signal ConditioningNone (passive)
Operating Temperature0~70℃

Used In

  • 10G top-of-rack and access switches in data centers and enterprise networks
  • Server NICs and converged adapters running 10GbE
  • Rack-to-rack links between neighbouring cabinets
  • Typical platforms: Cisco Nexus 9300 / 9200 series and Catalyst 9300 / 9500, Arista 7050X / 7060X series, Juniper EX4600 / QFX5100, NVIDIA Spectrum SN2000 / SN3000 series and ConnectX NICs, Huawei CloudEngine 6857 / 5855, Nokia 7250 IXR, H3C S6520X / S12500 and ZTE ZXR10 5960 series.

Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.

Where It Fits

  • Rack-to-rack uplinks between neighbouring cabinets in the same row
  • Middle-of-row aggregation over short copper runs
  • Replacing transceiver pairs where the run is short enough for copper — lower cost, lower power, nothing to clean or pair

Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.

More in 10G SFP DAC

Part Number Description Picture Data Rate(Mbps) AWG Media Type Length Temp.(℃) Note Datasheet
ST-DAC-10G-SFP-0.5 10G SFP+ to SFP+ Passive DAC, 30AWG, 0.5m ST-DAC-10G-SFP-0.5 10Gbps/10Gbps 30AWG Passive Direct Attach Copper Twinax Cable 0.5m (2ft) 0~70℃ SFP-H10GB-CU50CM Compatible; SFP+ to SFP+; ≤0.1W
ST-DAC-10G-SFP-1 10G SFP+ to SFP+ Passive DAC, 30AWG, 1m ST-DAC-10G-SFP-1 10Gbps/10Gbps 30AWG Passive Direct Attach Copper Twinax Cable 1m (3ft) 0~70℃ SFP-H10GB-CU1M Compatible; SFP+ to SFP+; ≤0.1W
ST-DAC-10G-SFP-1.5 10G SFP+ to SFP+ Passive DAC, 30AWG, 1.5m ST-DAC-10G-SFP-1.5 10Gbps/10Gbps 30AWG Passive Direct Attach Copper Twinax Cable 1.5m (5ft) 0~70℃ SFP-H10GB-CU1.5M Compatible; SFP+ to SFP+; ≤0.1W
ST-DAC-10G-SFP-2 10G SFP+ to SFP+ Passive DAC, 30AWG, 2m ST-DAC-10G-SFP-2 10Gbps/10Gbps 30AWG Passive Direct Attach Copper Twinax Cable 2m (7ft) 0~70℃ SFP-H10GB-CU2M Compatible; SFP+ to SFP+; ≤0.1W
ST-DAC-10G-SFP-2.5 10G SFP+ to SFP+ Passive DAC, 30AWG, 2.5m ST-DAC-10G-SFP-2.5 10Gbps/10Gbps 30AWG Passive Direct Attach Copper Twinax Cable 2.5m (8ft) 0~70℃ SFP-H10GB-CU2.5M Compatible; SFP+ to SFP+; ≤0.1W
ST-DAC-10G-SFP-3 10G SFP+ to SFP+ Passive DAC, 30AWG, 3m ST-DAC-10G-SFP-3 10Gbps/10Gbps 30AWG Passive Direct Attach Copper Twinax Cable 3m (10ft) 0~70℃ SFP-H10GB-CU3M Compatible; SFP+ to SFP+; ≤0.1W
ST-DAC-10G-SFP-4 10G SFP+ to SFP+ Passive DAC, 28AWG, 4m ST-DAC-10G-SFP-4 10Gbps/10Gbps 28AWG Passive Direct Attach Copper Twinax Cable 4m (13ft) 0~70℃ SFP-H10GB-CU4M Compatible; SFP+ to SFP+; ≤0.1W
ST-DAC-10G-SFP-5 10G SFP+ to SFP+ Passive DAC, 24AWG, 5m ST-DAC-10G-SFP-5 10Gbps/10Gbps 24AWG Passive Direct Attach Copper Twinax Cable 5m (16ft) 0~70℃ SFP-H10GB-CU5M Compatible; SFP+ to SFP+; ≤0.1W
ST-DAC-10G-SFP-6 10G SFP+ to SFP+ Passive DAC, 24AWG, 6m ST-DAC-10G-SFP-6 10Gbps/10Gbps 24AWG Passive Direct Attach Copper Twinax Cable 6m (20ft) 0~70℃ SFP-H10GB-CU6M Compatible; SFP+ to SFP+; ≤0.1W
ST-DAC-10G-SFP-7 10G SFP+ to SFP+ Passive DAC, 24AWG, 7m ST-DAC-10G-SFP-7 10Gbps/10Gbps 24AWG Passive Direct Attach Copper Twinax Cable 7m (23ft) 0~70℃ SFP-H10GB-CU7M Compatible; SFP+ to SFP+; ≤0.1W
ST-DAC-10G-SFP-1A 10G SFP+ to SFP+ Active DAC, 30AWG, 1m ST-DAC-10G-SFP-1A 10Gbps/10Gbps 30AWG Active Direct Attach Copper Twinax Cable 1m(3ft) 0~70℃ SFP-H10GB-ACU1M Compatible; SFP+ to SFP+; ≤0.5W
ST-DAC-10G-SFP-3A 10G SFP+ to SFP+ Active DAC, 30AWG, 3m ST-DAC-10G-SFP-3A 10Gbps/10Gbps 30AWG Active Direct Attach Copper Twinax Cable 3m(10ft) 0~70℃ SFP-H10GB-ACU3M Compatible; SFP+ to SFP+; ≤0.5W
ST-DAC-10G-SFP-5A 10G SFP+ to SFP+ Active DAC, 28AWG, 5m ST-DAC-10G-SFP-5A 10Gbps/10Gbps 28AWG Active Direct Attach Copper Twinax Cable 5m(16ft) 0~70℃ SFP-H10GB-ACU5M Compatible; SFP+ to SFP+; ≤0.5W
ST-DAC-10G-SFP-7A 10G SFP+ to SFP+ Active DAC, 26AWG, 7m ST-DAC-10G-SFP-7A 10Gbps/10Gbps 26AWG Active Direct Attach Copper Twinax Cable 7m(23ft) 0~70℃ SFP-H10GB-ACU7M Compatible; SFP+ to SFP+; ≤0.5W
ST-DAC-10G-SFP-10A 10G SFP+ to SFP+ Active DAC, 26AWG, 10m ST-DAC-10G-SFP-10A 10Gbps/10Gbps 26AWG Active Direct Attach Copper Twinax Cable 10m(33ft) 0~70℃ SFP-H10GB-ACU10M Compatible; SFP+ to SFP+; ≤0.55W