• 10G SFP+ / XFP / X2 / XENPAK Transceivers

ST-10G-CWDM-XXXX-40

ST-10G-CWDM-XXXX-40
Email: sales@sateoptics.com

3-year warranty · Standard lead time 3–7 days

10G CWDM SFP+ Optical Transceiver — 40km, 1270–1370nm Band

The Sate Optics ST-10G-CWDM-XXXX-40 is a 10G CWDM SFP+ optical transceiver for single-mode links up to 40km, supplied on the lower CWDM channels from 1270nm to 1370nm. It pairs with a CWDM mux/demux to run multiple 10G channels over one fiber pair on metro spans.

Why This Module

  • Lower-band CWDM channels: 1270–1370nm on the 20nm grid, specified when you order
  • 40km metro budget: 0 ~ +5 dBm launch and -15 dBm sensitivity
  • DDM monitoring: real-time optical power, temperature and voltage readings, 0~70℃ commercial range
  • Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.

Key Specifications

ParameterSpecification
Form FactorSFP+
Data Rate10Gbps
Wavelength1270~1370nm (CWDM grid)
Fiber TypeSingle Mode Fiber (SMF)
Transmission DistanceUp to 40km
TX Power0 ~ +5 dBm
RX Sensitivity-15 dBm
Operating Temperature0~70℃

Used In

  • 10G switches and routers in metro WDM networks
  • Aggregation platforms feeding passive CWDM/DWDM mux shelves
  • Metro aggregation switches lighting CWDM channels
  • Typical platforms: Cisco Nexus 9300 / 9200 series and Catalyst 9300 / 9500, Arista 7050X / 7060X series, Juniper EX4600 / QFX5100, NVIDIA Spectrum SN2000 / SN3000 series and ConnectX NICs, Huawei CloudEngine 6857 / 5855, Nokia 7250 IXR, H3C S6520X / S12500 and ZTE ZXR10 5960 series.

Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.

Where It Fits

  • CWDM metro rings up to 40km
  • Multi-service aggregation sharing one fiber pair
  • Leased-fiber DCI with muxed 10G channels

Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.

More in 10G SFP+ CWDM/DWDM Optical Transceivers

Part Number Model No. Picture Data Rate(Mbps) Wavelength Media Type Reach TX Power(dBm) RX Sens.(dBm) Temp.(℃) Note Datasheet
ST-10G-CWDM-XXXX-20 10G CWDM SFP+ 20km Compatible ST-10G-CWDM-XXXX-20 10Gbps 1270~1610nm Single-mode Fiber (SMF) 20km -5 ~ 0 dBm -14 dBm 0~70℃ Compatible 10G SFP+ CWDM Optical Transceiver
ST-10G-CWDM-XXXX-40 10G CWDM SFP+ 40km Compatible ST-10G-CWDM-XXXX-40 10Gbps 1270~1370nm Single-mode Fiber (SMF) 40km 0 ~ +5 dBm -15 dBm 0~70℃ Compatible 10G SFP+ CWDM Optical Transceiver
ST-10G-CWDM-XXXX-40 10G CWDM SFP+ 40km Compatible ST-10G-CWDM-XXXX-40 10Gbps 1470~1610nm Single-mode Fiber (SMF) 40km -1 ~ +3 dBm -15.8 dBm 0~70℃ Compatible 10G SFP+ CWDM Optical Transceiver
ST-10G-CWDM-XXXX-60 10G CWDM SFP+ 60km Compatible ST-10G-CWDM-XXXX-60 10Gbps 1270~1330nm Single-mode Fiber (SMF) 60km 0 ~ +5 dBm -20dBm 0~70℃ Compatible 10G SFP+ CWDM Optical Transceiver
ST-10G-CWDM-XXXX-80 10G CWDM SFP+ 80km Compatible ST-10G-CWDM-XXXX-80 10Gbps 1470~1610nm Single-mode Fiber (SMF) 80km 0 ~ +4 dBm -23 dBm 0~70℃ Compatible 10G SFP+ CWDM Optical Transceiver
ST-10G-DWDM-XXXX-40 10G DWDM SFP+ 40km Compatible ST-10G-DWDM-XXXX-40 10Gbps CH17~CH61 Single-mode Fiber (SMF) 40km -1 ~ +3 dBm -15.8 dBm 0~70℃ Compatible 10G SFP+ DWDM Optical Transceiver
ST-10G-DWDM-XXXX-80 10G DWDM SFP+ 80km Compatible ST-10G-DWDM-XXXX-80 10Gbps CH17~CH61 Single-mode Fiber (SMF) 80km -1 ~ +4 dBm -23 dBm 0~70℃ Compatible 10G SFP+ DWDM Optical Transceiver
ST-10G-DWDM-TUNABLE-80 10G Tunable DWDM SFP+ 80km Compatible ST-10G-DWDM-TUNABLE-80 10Gbps CH17~CH61 (Tunable) Single-mode Fiber (SMF) 80km 0 ~ +5 dBm -24 dBm 0~70℃ Compatible 10G SFP+ Tunable DWDM Optical Transceiver