ST-DAC-QSFP28-2*QSFP28-4
3-year warranty · Standard lead time 3–7 days
Sate Optics ST-DAC-QSFP28-2*QSFP28-4 is a 100G QSFP28 to 2x 50G Passive Direct Attach Copper Breakout Cable that turns a single high-density QSFP28 port into two separate 50G links without a fan-out panel. The 100G trunk divides into two QSFP28 legs over 4m of twinax, and the assembly is coded to match Q-2QPC04.
The breakout is passive: there is no active component in the run, so it adds nothing that can fail or need firmware, and it draws at most 0.5W. Because each QSFP28 leg is a fixed copper pair with no optical engine, there is no wavelength to match, no end-face to clean and no polarity to reverse at the split point. The connector heads are no deeper than a standard module, so adjacent ports stay clear.
With a 4m reach and a 0°C to +70°C operating temperature range, the ST-DAC-QSFP28-2*QSFP28-4 suits server-to-ToR connections in dense compute trays, storage-to-switch links and switch stacking cables that must stay out of the cold aisle. At this length the run spans a full rack row, where passive copper starts losing margin.
More in 100G QSFP28 To 2x50G QSFP28 Breakout DAC
| Part Number | Description | Picture | Data Rate(Mbps) | AWG | Media Type | Length | Temp.(℃) | Note | Datasheet |
|---|---|---|---|---|---|---|---|---|---|
| ST-DAC-QSFP28-2*QSFP28-0.5 | 100G QSFP28 to 2x50G QSFP28 Passive DAC, 30AWG, 0.5m | ![]() |
100Gbps/2x50Gbps | 30AWG | Passive Direct Attach Copper Breakout Cable | 0.5m(2ft) | 0~70℃ | Q-2QPC005 Compatible; QSFP28 to 2x50G QSFP28; ≤0.5W | |
| ST-DAC-QSFP28-2*QSFP28-1 | 100G QSFP28 to 2x50G QSFP28 Passive DAC, 30AWG, 1m | ![]() |
100Gbps/2x50Gbps | 30AWG | Passive Direct Attach Copper Breakout Cable | 1m(3ft) | 0~70℃ | Q-2QPC01 Compatible; QSFP28 to 2x50G QSFP28; ≤0.5W | |
| ST-DAC-QSFP28-2*QSFP28-2 | 100G QSFP28 to 2x50G QSFP28 Passive DAC, 30AWG, 2m | ![]() |
100Gbps/2x50Gbps | 30AWG | Passive Direct Attach Copper Breakout Cable | 2m(7ft) | 0~70℃ | Q-2QPC02 Compatible; QSFP28 to 2x50G QSFP28; ≤0.5W | |
| ST-DAC-QSFP28-2*QSFP28-3 | 100G QSFP28 to 2x50G QSFP28 Passive DAC, 30AWG, 3m | ![]() |
100Gbps/2x50Gbps | 30AWG | Passive Direct Attach Copper Breakout Cable | 3m(10ft) | 0~70℃ | Q-2QPC03 Compatible; QSFP28 to 2x50G QSFP28; ≤0.5W | |
| ST-DAC-QSFP28-2*QSFP28-4 | 100G QSFP28 to 2x50G QSFP28 Passive DAC, 28AWG, 4m | ![]() |
100Gbps/2x50Gbps | 28AWG | Passive Direct Attach Copper Breakout Cable | 4m(13ft) | 0~70℃ | Q-2QPC04 Compatible; QSFP28 to 2x50G QSFP28; ≤0.5W | |
| ST-DAC-QSFP28-2*QSFP28-5 | 100G QSFP28 to 2x50G QSFP28 Passive DAC, 26AWG, 5m | ![]() |
100Gbps/2x50Gbps | 26AWG | Passive Direct Attach Copper Breakout Cable | 5m(16ft) | 0~70℃ | Q-2QPC05 Compatible; QSFP28 to 2x50G QSFP28; ≤0.5W |


