ST-100-SFP-TI
3-year warranty · Standard lead time 3–7 days
100BASE-T Copper SFP Transceiver Industrial — RJ45, 100m, -40~85℃
The Sate Optics ST-100-SFP-TI is the industrial-temperature build of the 100BASE-T copper SFP: it turns an SFP cage into a standard RJ45 Ethernet port, 100Mbps over Cat5e or Cat6 UTP cabling up to 100m, rated -40~85℃ for outdoor cabinets and harsh sites.
Why This Module
- A copper port in an SFP cage: standard RJ45 connector for existing UTP wiring
- Full 100m reach: the complete 100BASE-T distance over Cat5e or better cabling
- Industrial temperature: -40~85℃ range for outdoor cabinets and harsh sites
Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.
Key Specifications
| Parameter | Specification |
| Form Factor | SFP |
| Data Rate | 100Mbps |
| Standard | IEEE 802.3u 100BASE-T |
| Media Type | Copper RJ45 |
| Connector | RJ45 |
| Cable Type | Cat5e / Cat6 UTP |
| Transmission Distance | Up to 100m |
| Operating Temperature | -40~85℃ |
Used In
- Fast Ethernet switches with SFP cages needing a copper uplink or access port
- Utility, rail and industrial networks reusing installed UTP cabling
- Legacy Fast Ethernet endpoints where fiber is not available
- Typical platforms: Cisco Industrial Ethernet IE series, Siemens RuggedCom, Hirschmann (Belden) series, and other Fast Ethernet switches with SFP cages.
Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.
Where It Fits
- Copper uplinks and access ports on SFP-cage switches
- Reusing installed Cat5e wiring instead of pulling new fiber
- Fast Ethernet links up to the full 100m copper reach
Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.
More in 100BASE-T COPPER SFP Transceivers
| Part Number | Model No. | Picture | Data Rate(Mbps) | Wavelength | Media Type | Reach | TX Power(dBm) | RX Sens.(dBm) | Temp.(℃) | Note | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ST-100-SFP-TI | 100BASE-T Industrial Copper SFP RJ45 100m Transceiver | ![]() |
100Mbps | N/A | Copper RJ45 | 100m | N/A | N/A | -40~85℃ | Compatible 100BASE-T Industrial Copper SFP Transceiver | |
| ST-100-SFP-T | 100BASE-T Copper SFP RJ45 100m Transceiver | ![]() |
100Mbps | N/A | Copper RJ45 | 100m | N/A | N/A | 0~70℃ | Compatible 100BASE-T Copper SFP Transceiver |


