• 2.5G SFP Transceivers

ST-2.5G-SFP-BD33-2

ST-2.5G-SFP-BD33-2
Email: sales@sateoptics.com

3-year warranty · Standard lead time 3–7 days

2.5G SFP BiDi BD33 Optical Transceiver — 2km over One Fiber

The Sate Optics ST-2.5G-SFP-BD33-2 is a 2.5G SFP BiDi optical transceiver that carries 2.5 Gigabit Ethernet both ways over a single fiber strand, transmitting and receiving at 1310nm for links up to 2km. It doubles the capacity of an existing fiber plant on short access runs.

Why This Module

  • One fiber, both directions: 1310nm TX / 1310nm RX over a single strand
  • Short-reach BiDi: built for 2km access runs where fiber pairs are exhausted
  • DDM monitoring: real-time optical power, temperature and voltage readings, 0~70℃ commercial range
  • Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.

Key Specifications

ParameterSpecification
Form FactorSFP
Data Rate2.5Gbps
Wavelength1310nm TX / 1310nm RX
Fiber TypeSingle Mode Fiber (SMF)
Transmission DistanceUp to 2km
TX Power-10 ~ -3 dBm
RX Sensitivity-18 dBm
Operating Temperature0~70℃

Used In

  • Multigigabit access switches and aggregation routers on fiber-constrained routes
  • FTTx and business-Ethernet access nodes fed by a single fiber strand
  • Access aggregation points where fiber pairs are exhausted
  • Typical platforms: Huawei S5735 / S5731 series, H3C S5130S series and other enterprise switches with 2.5G SFP ports.

Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.

Where It Fits

  • Single-fiber 2.5G access up to 2km
  • Fiber-relief projects doubling capacity per strand
  • Campus access tails on one strand

Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.

More in 2.5G SFP BIDI Optical Transceivers

Part Number Model No. Picture Data Rate(Mbps) Wavelength Media Type Reach TX Power(dBm) RX Sens.(dBm) Temp.(℃) Note Datasheet
ST-2.5G-SFP-BD33-2 2.5G SFP BIDI BD33-2 2km Compatible ST-2.5G-SFP-BD33-2 2.5Gbps 1310nm Tx / 1310nm Rx Single-mode Fiber (SMF) 2km -10 ~ -3 dBm -18 dBm 0~70℃ Compatible 2.5G SFP BIDI 2km Optical Transceiver
ST-2.5G-SFP-BD35(53)-20 2.5G SFP BIDI BD35(53) 20km Compatible ST-2.5G-SFP-BD35(53)-20 2.5Gbps 1310nm Tx / 1550nm Rx ↔ 1550nm Tx / 1310nm Rx Single-mode Fiber (SMF) 20km -5 ~ 0 dBm -19 dBm 0~70℃ Compatible 2.5G SFP BIDI BD35(53) Optical Transceiver
ST-2.5G-SFP-BD34(43)-20 2.5G SFP BIDI BD34(43) 20km Compatible ST-2.5G-SFP-BD34(43)-20 2.5Gbps 1310nm Tx / 1490nm Rx ↔ 1490nm Tx / 1310nm Rx Single-mode Fiber (SMF) 20km -5 ~ 0 dBm -19 dBm 0~70℃ Compatible 2.5G SFP BIDI BD34(43) Optical Transceiver
ST-2.5G-SFP-BD35(53)-40 2.5G SFP BIDI BD35(53) 40km Compatible ST-2.5G-SFP-BD35(53)-40 2.5Gbps 1310nm Tx / 1550nm Rx ↔ 1550nm Tx / 1310nm Rx Single-mode Fiber (SMF) 40km -2 ~ +3 dBm -19 dBm 0~70℃ Compatible 2.5G SFP BIDI BD35(53) Optical Transceiver
ST-2.5G-SFP-BD34(43)-40 2.5G SFP BIDI BD34(43) 40km Compatible ST-2.5G-SFP-BD34(43)-40 2.5Gbps 1310nm Tx / 1490nm Rx ↔ 1490nm Tx / 1310nm Rx Single-mode Fiber (SMF) 40km -2 ~ +3 dBm -23 dBm 0~70℃ Compatible 2.5G SFP BIDI BD34(43) Optical Transceiver
ST-2.5G-SFP-BD35(53)-60 2.5G SFP BIDI BD35(53) 60km Compatible ST-2.5G-SFP-BD35(53)-60 2.5Gbps 1310nm Tx / 1550nm Rx ↔ 1550nm Tx / 1310nm Rx Single-mode Fiber (SMF) 60km -2 ~ +3 dBm -24 dBm 0~70℃ Compatible 2.5G SFP BIDI BD35(53) Optical Transceiver
ST-2.5G-SFP-BD34(43)-60 2.5G SFP BIDI BD34(43) 60km Compatible ST-2.5G-SFP-BD34(43)-60 2.5Gbps 1310nm Tx / 1490nm Rx ↔ 1490nm Tx / 1310nm Rx Single-mode Fiber (SMF) 60km -2 ~ +3 dBm -24 dBm 0~70℃ Compatible 2.5G SFP BIDI BD34(43) Optical Transceiver
ST-2.5G-SFP-BD45(54)-80 2.5G SFP BIDI BD45(54) 80km Compatible ST-2.5G-SFP-BD45(54)-80 2.5Gbps 1490nm Tx / 1550nm Rx ↔ 1550nm Tx / 1490nm Rx Single-mode Fiber (SMF) 80km -3 ~ +3 dBm -24 dBm 0~70℃ Compatible 2.5G SFP BIDI BD45(54) Optical Transceiver