• 10G SFP+ / XFP / X2 / XENPAK Transceivers

10G XFP Optical Transceivers

This range covers the models in the table below with reaches from 300m to 100km, in 850nm multimode and 1310nm and 1550nm wavelength options, over both multimode and single-mode fiber. Every model lists its data rate, wavelength, fiber type, reach, TX/RX power and operating temperature in the comparison table, so the right module for a link can be picked from the numbers, not from guesswork.

Choose by distance first: multimode types cover short runs inside rooms and data centers, while single-mode types cover campus, metro and long-haul spans. Then check the TX power and RX sensitivity in the table against the loss of your fiber run, and the temperature grade against where the switch actually sits.

Every module in this range is coded for major networking platforms and 100% tested before shipment, and is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.

Part Number Description Picture Data Rate Wavelength Media Type Reach TX Power(dBm) RX Sens.(dBm) Temp.(℃) Note Datasheet
ST-10G-XFP-SR 10G XFP SR 300m Compatible ST-10G-XFP-SR 10Gbps 850nm Multimode Fiber (MMF) 300m -6.5 ~ -0.5 dBm -10.5 dBm 0~70℃ Compatible 10G XFP SR Optical Transceiver
ST-10G-XFP-LR 10G XFP LR 10km Compatible ST-10G-XFP-LR 10Gbps 1310nm Single-mode Fiber (SMF) 10km -6.5 ~ +0.5 dBm -14.5 dBm 0~70℃ Compatible 10G XFP LR Optical Transceiver
ST-10G-XFP-ER 10G XFP ER 40km Compatible ST-10G-XFP-ER 10Gbps 1550nm Single-mode Fiber (SMF) 40km -1 ~ +2 dBm -16 dBm 0~70℃ Compatible 10G XFP ER Optical Transceiver
ST-10G-XFP-ZR 10G XFP ZR 80km Compatible ST-10G-XFP-ZR 10Gbps 1550nm Single-mode Fiber (SMF) 80km 0 ~ +4 dBm -23 dBm 0~70℃ Compatible 10G XFP ZR Optical Transceiver
ST-10G-XFP-ZR+ 10G XFP ZR+ 100km Compatible ST-10G-XFP-ZR+ 10Gbps 1550nm Single-mode Fiber (SMF) 100km +1 ~ +4 dBm -24 dBm 0~70℃ Compatible 10G XFP ZR+ Optical Transceiver