ST-10G-XFP-CWDM-XXXX-40
3-year warranty · Standard lead time 3–7 days
10G XFP CWDM Optical Transceiver — 40km, 1470–1610nm Band
The Sate Optics ST-10G-XFP-CWDM-XXXX-40 is a 10G XFP CWDM optical transceiver for single-mode links up to 40km, supplied on the upper CWDM channels from 1470nm to 1610nm. It pairs with a CWDM mux/demux to run multiple 10G channels over one fiber pair on XFP-generation platforms.
Why This Module
- Upper-band CWDM channels: 1470–1610nm on the 20nm grid, specified when you order
- Mux-ready: pairs with CWDM MUX/DEMUX shelves to multiply fiber capacity
- DDM monitoring: real-time optical power, temperature and voltage readings, 0~70℃ commercial range
Compatible with your platform — coded for major networking platforms, including Cisco, Juniper, Arista, Huawei, Nokia, H3C and ZTE; 100% tested before shipment.
Key Specifications
| Parameter | Specification |
| Form Factor | XFP |
| Data Rate | 10Gbps |
| Wavelength | 1470~1610nm (CWDM grid) |
| Fiber Type | Single Mode Fiber (SMF) |
| Transmission Distance | Up to 40km |
| TX Power | -1 ~ +4 dBm |
| RX Sensitivity | -16.5 dBm |
| Operating Temperature | 0~70℃ |
Used In
- Routers and line cards with XFP cages in carrier and enterprise networks
- Aggregation platforms feeding passive CWDM/DWDM mux shelves
- Metro aggregation routers lighting CWDM channels
- Typical platforms: Cisco ASR 9000 and Catalyst 6500 / 7600 series, Juniper MX series, Huawei NE40E / S9300, Nokia 7750 SR and H3C S12500 series.
Not sure it fits your equipment? Request a Quote and tell us your switch model — we confirm compatibility before you order.
Where It Fits
- CWDM metro rings up to 40km on XFP platforms
- Multi-service aggregation sharing one fiber pair
- Spares for installed XFP CWDM estates
Every module is covered by a 3-year warranty with lifetime maintenance. Standard lead time is 3–7 days for most products, and samples are available for evaluation.
More in 10G XFP CWDM/DWDM Optical Transceivers
| Part Number | Model No. | Picture | Data Rate(Mbps) | Wavelength | Media Type | Reach | TX Power(dBm) | RX Sens.(dBm) | Temp.(℃) | Note | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ST-10G-XFP-CWDM-XXXX-40 | 10G XFP CWDM 40km Compatible | ![]() |
10Gbps | 1270~1410nm | Single-mode Fiber (SMF) | 40km | 0 ~ +5 dBm | -15 dBm | 0~70℃ | Compatible 10G XFP CWDM Optical Transceiver | |
| ST-10G-XFP-CWDM-XXXX-40 | 10G XFP CWDM 40km Compatible | ![]() |
10Gbps | 1470~1610nm | Single-mode Fiber (SMF) | 40km | -1 ~ +4 dBm | -16.5 dBm | 0~70℃ | Compatible 10G XFP CWDM Optical Transceiver | |
| ST-10G-XFP-CWDM-XXXX-80 | 10G XFP CWDM 80km Compatible | ![]() |
10Gbps | 1470~1610nm | Single-mode Fiber (SMF) | 80km | 0 ~ +5 dBm | -24 dBm | 0~70℃ | Compatible 10G XFP CWDM Optical Transceiver | |
| ST-10G-XFP-DWDM-XXXX-40 | 10G XFP DWDM 40km Compatible | ![]() |
10Gbps | CH17~CH61 | Single-mode Fiber (SMF) | 40km | 0 ~ +4 dBm | -22 dBm | 0~70℃ | Compatible 10G XFP DWDM Optical Transceiver | |
| ST-10G-XFP-DWDM-XXXX-80 | 10G XFP DWDM 80km Compatible | ![]() |
10Gbps | CH17~CH61 | Single-mode Fiber (SMF) | 80km | 0 ~ +5 dBm | -24 dBm | 0~70℃ | Compatible 10G XFP DWDM Optical Transceiver |



