MPO-24 to MPO-24 Single Mode Trunk Cable 10m
Sate Optics MPO-24 to MPO-24 Single Mode Trunk Cable 10m puts 24 OS2 single-mode fibers behind a single MPO connector at each end, so one cable replaces 12 duplex cords. It is used for trunk runs between racks and between rows in 40G, 100G, 200G and 400G builds.
The assembly is 10m long. Other lengths, fiber types and polarity options are available on request.
More in MPO Trunks
| Part Number | Model No. | Picture | Data Rate(Mbps) | Wavelength | Media Type | Reach | TX Power(dBm) | RX Sens.(dBm) | Temp.(℃) | Note | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MPO-24 to MPO-24 Single Mode Trunk Cable 10m | MPO-24 to MPO-24, OS2, 24F, 10m, APC | |
— | 1260–1650nm | OS2 Single-mode (SMF) | 10m | — | — | — | Custom lengths and connector combinations availableRequest Datasheet | |
| MPO-12 to 4x LC Duplex OM4 Breakout Cable 5m | MPO-12 to 4x LC duplex, OM4, 8F, 5m, UPC |  |
— | 850/1300nm | OM4 Multimode (MMF) | 5m | — | — | — | Custom lengths and connector combinations availableRequest Datasheet | |
| MPO-8 to MPO-8 OM4 Trunk Cable 3m | MPO-8 to MPO-8, OM4, 8F, 3m, UPC |  |
— | 850/1300nm | OM4 Multimode (MMF) | 3m | — | — | — | Custom lengths and connector combinations availableRequest Datasheet | |
| MPO-12 to MPO-12 OM4 Trunk Cable 10m | MPO-12 to MPO-12, OM4, 12F, 10m, UPC |  |
— | 850/1300nm | OM4 Multimode (MMF) | 10m | — | — | — | Custom lengths and connector combinations availableRequest Datasheet |
