MPO-12 to 4x LC Duplex OM4 Breakout Cable 5m
Sate Optics MPO-12 to 4x LC Duplex OM4 Breakout Cable 5m converts one MPO-12 trunk into four LC duplex pairs. It is the usual way to connect a 40G or 100G port that is broken out into four 10G or 25G links to the equipment in the rack.
The cable uses OM4 multimode fiber, is 5m long, and is built with UPC contacts. Other lengths and polarity options are available on request.
More in MPO Trunks
| Part Number | Model No. | Picture | Data Rate(Mbps) | Wavelength | Media Type | Reach | TX Power(dBm) | RX Sens.(dBm) | Temp.(℃) | Note | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MPO-24 to MPO-24 Single Mode Trunk Cable 10m | MPO-24 to MPO-24, OS2, 24F, 10m, APC |  |
— | 1260–1650nm | OS2 Single-mode (SMF) | 10m | — | — | — | Custom lengths and connector combinations availableRequest Datasheet | |
| MPO-12 to 4x LC Duplex OM4 Breakout Cable 5m | MPO-12 to 4x LC duplex, OM4, 8F, 5m, UPC | |
— | 850/1300nm | OM4 Multimode (MMF) | 5m | — | — | — | Custom lengths and connector combinations availableRequest Datasheet | |
| MPO-8 to MPO-8 OM4 Trunk Cable 3m | MPO-8 to MPO-8, OM4, 8F, 3m, UPC |  |
— | 850/1300nm | OM4 Multimode (MMF) | 3m | — | — | — | Custom lengths and connector combinations availableRequest Datasheet | |
| MPO-12 to MPO-12 OM4 Trunk Cable 10m | MPO-12 to MPO-12, OM4, 12F, 10m, UPC |  |
— | 850/1300nm | OM4 Multimode (MMF) | 10m | — | — | — | Custom lengths and connector combinations availableRequest Datasheet |
