SC/UPC Fixed Fiber Attenuator 5dB
Sate Optics SC/UPC Fixed Fiber Attenuator 5dB is a fixed fiber optic attenuator that reduces optical power by 5dB. It is used where a transmitter is too strong for the receiver at the other end, which happens on short links and on CWDM or DWDM channels that are added close to the receiver.
The attenuator plugs in between two SC/UPC connectors and needs no power or adjustment. Attenuation values other than 5dB are available on request.
More in Attenuators
| Part Number | Model No. | Picture | Data Rate(Mbps) | Wavelength | Media Type | Reach | TX Power(dBm) | RX Sens.(dBm) | Temp.(℃) | Note | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SC/UPC Fixed Fiber Attenuator 5dB | SC/UPC Fixed Attenuator, 5dB | |
— | 1260–1650nm | Single-mode / Multimode compatible | — | — | — | — | Attenuation tolerance ±0.5dB, custom values availableRequest Datasheet | |
| LC/UPC Fixed Fiber Attenuator 10dB | LC/UPC Fixed Attenuator, 10dB |  |
— | 1260–1650nm | Single-mode / Multimode compatible | — | — | — | — | Attenuation tolerance ±0.5dB, custom values availableRequest Datasheet | |
| LC/UPC Fixed Fiber Attenuator 5dB | LC/UPC Fixed Attenuator, 5dB |  |
— | 1260–1650nm | Single-mode / Multimode compatible | — | — | — | — | Attenuation tolerance ±0.5dB, custom values availableRequest Datasheet |
